曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

years experience on transport category aircraft, to perform inspections on transport aircraft
during overhaul and maintenance
This course fulfills ATA 104 Level IV objectives
Target Group: A&P Mechanics, Airframe Mechanics, Avionics
Prerequisites: Senior level maintenance technicians or delegated inspectors with a minimum of two years
experience on transport aircraft. Fluent in English or German
SRM Handskill Training FS103
Duration: 5 days
Course Objectives: This course enables structure technicians to regain the ability to perform typical repairs on
metal structure parts. It is aimed at participants who have already acquired experience in
structure repair work but whose practical employment dates back several years.
All repairs in the practical training follow the guidelines of the Structural Repair Manual
This course fulfills ATA 104 Level IV objectives
Target Group: Structural repair technicians, airframe mechanics or sheet metal workers who have acquired
experience in structure repair but whose practical employment dates back several years
Prerequisites: Skilled structural technicians with basic experience in structure repair of metallic aircraft
parts. Fluent in English or German
Fatigue Improvement FS107
Duration: 7 days
Course Objectives: This course informs the student about the fundamentals of fatigue improvement procedures
on metallic aircraft structures. The course includes lectures, demonstrations and hands-on
practice.
The hands-on practice includes Splitsleeve Cold Expansion, Flap-Peening and Taper-Lok
installation
All practical exercises follow the guidelines of the Structural Repair Manual
This course satisfies ATA 104 Lvel IV objectives
Target Group: Structural repair technicians involved in structure repair and maintenance of modern
transport aircraft.
Prerequisites: Previous structure experience. Fluent in English or German
Basic Training for Aircraft Painting and Removal FS004
Duration: 15 days
Course Objectives: This course trains aircraft varnishers in aircraft painting and paint removal procedures required
to perform finishing repair work on different aircraft types during Line and Base Maintenance
This course fulfills ATA 104 Lvel IV objectives
Target Group: Painter and Varnisher, Lacquerer
Prerequisites: Varnisher with prior experience on painting ranging from aerospace and/or automotive
industries. Fluent in English or German
Aircraft Structure Fundamentals FS006
Duration: 30 days
Course Objectives: Entry level structural repair technicians will gain the basic knowledge of working with common
sheet metal tools to perform general aircraft structural repairs. The course trains the description
and operation of basic sheetmetal repair tools as well as knowledge about basic aircraft
hardware such as common materials and fastener installation and removal procedures.
All repairs performed in the practical training follow the guidelines of the Structural Repair
Manual
This course fulfills ATA 104 Level IV objectives
Target Group: Entry-level structural Repair Technicians, entry level Airframe Mechanics, Sheetmetal Worker
Prerequisites: Basic knowledge of structure repair work on transport aircraft
Fluent in English or German
Fastener Installation and Removal FS008
Duration: 5 days
Course Objectives: This course prepares the participant to locate, identify and interpret the correct fastener type
as well as determine the appropriate fastener removal and installation procedure.
Demonstrations and student practice sessions on all aspects of fastener types are part of this
course.
All hands-on training follows the guidelines of the Structural Repair Manual
This course fulfills ATA 104 Level IV objectives
Target Group: Airframe Mechanics, Entry-level Structural Repair Technicians
Prerequisites: Basic knowledge of structure repair work
Fluent in English or German
Fuel Tank Repair FS009
Duration: 10 days
Course Objectives: This course prepares structural technicians with the background and knowledge of an accurate
detection of fuel leak sources as well as how to perform the required corrective repairs.
All repairs performed in the practical training follow the guidelines of the Structural Repair
Manual
This course fulfills ATA 104 Level IV objectives
Target Group: Airframe Mechanics, Structural Repair Technicians involved in fuel leak detection and repair
Prerequisites: Basic knowledge of structure repair work on modern transport aircraft
Fluent in English or German
Documentation
Airbus Drawing Systems FS501
Boeing Drawing Systems FS502
Duration: 2 days
Course Objectives: This course prepares the trainee to locate, identify and interpret the correct drawing for a
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料18(95)