曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

prompted to select which net to transmit on another operator IDM.
if the subscriber ID is entered in more than
one NET.
a. Enter Destination ID by pressing L-1.
a. NET key  Press as desired to activate
d e s i r e d n e t a n d e n t e r s u b s c r i b e r b. Press L-2 to access Bulk Data Select page.
identifier(s). Making a selection causes a default back to
Bulk Data Summary page.
b. R-1 key  Press as required to access
subpages and enter identifiers. Press to c. SEND; then scroll to next page. Utilize the
sequence to return to Start page. SCROLL-SEND procedure until all desired
data has been sent.
7. AUTH key  Press and proceed as follows:
NOTE d. COMPLETE  Send COMPLETE message
when finished with bulk data transmission.
Subscriber must already be entered in
subscriber list. 11. IDM switch  Press.
a. SUBS key  Subscriber is displayed or a. Start key  Press.
press key and enter desired subscriber
using MFK.
b. Paging key  Press to display 3/3.
b. X M T L I N E  C u r r e n t t r a n s m i t
authentication table line will be displayed. c. L-1 key  Press to scroll through Rapid
To change, press key and enter desired function selections. Select desired function.
line.
d. L-3 key  Press to toggle between AUTO
c. RCV LINE  Current receive authentication SHOT on and off. AUTO SHOT does not
table line will be displayed. To change, function in this installation.
press key and enter desired line using MFK.
e. L-4 key  Press to access Serialization
d. MODE key  Press once to activate Subscriber Assignment page.
authentication tables. Press again to scroll
(1) L-1 key  Press to toggle between
between XMT, BOTH or RCV.
XMT and NONE.
(2) L-2 key  Press to enter desired
e. TABLE key  Press to access transmit or subscribers.
receive table index. (3) L-4 key  Press to scroll through
(1) Select desired transmit table line. subscribers to read initial serialization
(2) Press key adjacent to line number. count of messages.
Enter transmit authentication code from (4) R-4 key  Press to edit/enter initial
SOI. serialization count of messages.
(3) R-1 key  Press to sequence to Start (5) R-1 key  Press to return to Start page
page. 3/3.
8. MSGS key  If desired, press to access
Message Present Entry pages. Press R-1 key 12. Select IDM  Press. Then select Start page
as required to return to Start page. 1/3.
4-194
TM 1-1520-248-10
a. CURR NETS key  Press.
(2) OTHER ORDNANCE wherein there are seven
NOTE selections, NO PREF, ATGM, GUN, HE, ILLUM,
SMOKE, and CHAFF.
RADIO selection at L-4 selects the NET (3) NO PREF.
transmission radio. The radio selected to
receive net traffic need not be the same.
4 - 1 7 7 . STORING OR EXECUTING A I R
b. RADIO 1 through RADIO 4 keys  Press MISSION FIRE REQUEST.
one of the keys and use the MFK to type in
the desired net number for each radio to To store an air mission fire request, perform steps 1
receive. through 7.
c. RTN key  Press. 1. Target locate steps  Accomplish as
required.
d. ORIG key  Enter subscriber identifier.
2. IDM switch  Press as required to display
e. TEAM key  Enter team number. IDM Index page.
f. BC key  Enter broadcast number. 3. AIR REQ key  Press.
NOTE 4. Line (1-8)  Select mission number on which
mission is to be entered. NEW key  Press.
Time of day is automatically input by GPS.
5. MSN TYPE  Press appropriate key.
g. TIME key  Enter current time of day only if
GPS fails. 6. As pages sequence, press appropriate key.
4-176. AIR REQUEST PAGES. 7. Air Mission Summary page  Review and
change parameters as required.
a. Description. The Air Request (AIR REQ) list
To execute a fire request, perform steps 8 and 9.
can store up to eight fire mission requests. The three
index pages display observer mission number, type of
ordnance, firing element (subscriber) to which request 8. On Air Mission Summary page, SEND key 
was sent, and mission status. This list is for originating Press.
mission requests. Incoming new missions are stored in
the Received Message file. Stepping through the 9. IDM switch  Press and repeat steps 1
mission list is accomplished by pressing the paging through 8 above for each net as required.
(upper right) key on the MFD. Accessing a stored Air
Mission Request Summary page is accomplished by To recall and send a stored mission, perform steps 10
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(20)