曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

c. To abort zeroizing  Press paging key. always be in the range 00-0Z.
4-233. IDM INITIALIZATION. b. Page forward to access SUBS pages 2/9 9/
9.
1. IDM switch  Press. (1) On p a g e 9 / 9 , e n t e r a u t o m a t i c
authentication ID.
2. START  Press. (2) On page 9/9, press paging key and
return to Start page 2/3.
3. Paging key (1/3)  Press to access Start
page 2/3. 7. AUTH  Press to access Authentication
Control Entry page.
4. TEST-GO...Press  (enter T through MFK for
self test). a. Select SUB  If not visible, enter desired
subscriber’s ID.
5. NETS  Press to select 8 Net pages.
b. Select XMT LINE  Change if automatic
a. TFR/AIR NET  Scroll to select TFR or authentication line number is not as desired.
AIR.
c. Select RCV LINE  Same as for XMT LINE.
b. BLK  Select SGL or DBL.
d. MODE k e y  P r e s s once t o a c t i v e
c. BAUD  Select rate. authentication tables. Press again to scroll
between XMT, BOTH or RCV.
d. RADIO  Select 1 through 4.
e. PRE  Press for Preamble page. e. Select XMT TABLE. Starting on desired line,
(1) O n P r e a m b l e p a g e  S e l e c t enter transmit authentication code from SOI.
PREAMBLE and enter time. Page f o r w a r d a s needed t o access
(2) On Monitor page  Select MONITOR Authentication Control Entry page.
and enter time, or select OFF.
f. Select RCV TABLE. Follow same directions
f. AUTH  Select MANUAL or NONE. as for XMT TABLE. Page again to return to
Start page 2/3.
g. Paging key  Press to go to next page.
8. MSGS  Press to access Message Preset
NOTE Entry pages 1-6. Press L-3 to activate
keyboard. Enter free text message up to 36
Set up each of the remaining Net pages as characters in length. Six preset messages
needed by repeating steps a. through g. may be set up. Formulate messages and
Pressing the paging key on Net page 8/8 page through as needed. (MFD defaults to
causes a return to Start page 2/3. Start page 2/3 when exiting page 6/6.)
4-282
TM 1-1520-248-10
9. MVMT  Press to access 6 each Movement 12. IDM switch  Press.
Preset Entry pages. Press L-2 and/or L-3 on
each Preset page to enable keyboard. Enter a. Start key  Press.
up to 15 characters per line. Formulate
messages and page through as needed. b. Paging key  Press to display Start page 3/
(Operator defaults to Start page 2/3 when 3.
exiting page 6/6).
c. L-1 key  Press to scroll through Rapid
10. Select IDM switch  Then select Start page
function selections. Select desired function.
1/3.
a. CURR NETS  Press. d. L-3 key  Press to toggle between AUTO
SHOT on and off. AUTO SHOT does not
function in this installation.
b. RADIO 1 through RADIO 4 keys  Press
one of the keys and use the MFK to type in
the desired net number for each radio. e. L-4 key  Press to access Serialization
Subscriber Assignment page.
(1) L-1 key  Press to toggle between
c. RTN  Press.
XMT and NONE.
(2) L-2 key  Press to enter desired
d. ORIG  Enter ORIGIN (Originator’s) subscribers.
identifier. (3) L-4 key  Press to scroll through
subscribers to read initial serialization
e. TEAM  Enter TEAM identifier. count of messages.
(4) R-4 key  Press to edit/enter initial
f. BDCST  Enter BROADCAST identifier. serialization count of messages.
(5) R-1 key  Press to return to START
NOTE page 3/3.
Time of day is automatically input by GPS if
functioning. 4-234. ARTILLERY REQUEST.
g. TIME  Enter TIME using 24 hour format. 1. PREPLANNED (FPF & CPHD Only).
h. R-1 key  Press. a. To enter or select a preplanned request:
(1) Select IDM switch (accesses IDM Index
11. BULK  Press to access Bulk Data Summary page).
page. (2) Select ARTY REQ (selects Artillery
Mission pages).
On Bulk Data Summary page: (3) Select NEW  Next to present mission
to be replaced.
a. Enter Destination ID by pressing L-1 and (4) Select REQ PPLN  Choose preplan
specifying subscribers ID on MFK. mode.
(5) Select FPF or CPHD (Only one FPF
b. Press L-2 to access Bulk Data Select page. allowed).
Making a selection causes a default back to
Bulk Data Summary page. NOTE
c. SEND; then scroll to next page by pressing If KNPT TGT is selected, entry of two-digit
L-3. Utilize the “SCROLL-SEND” procedure KNPT number is required.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(52)