曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

fire mission. After the firing element has CONTROL box allows the operator to
fired the required rounds, they must either lase where the rounds landed
transmit a RNDS CMPLT message. This (LASE RND option) or to designate the
is indicated by the mission status target’s new position (LASE TGT
displaying RNDS CMPLT. When the option).
RNDS CMPLT message is received and
the CPG presses the Point Track (a) If the LASE RND option is selected,
switch, the display transitions to that the CONTROL box changes to
shown in Figure 4-115 (ARTY MSN indicate that the LASE RND option
4-248
TM 1-1520-248-10
(1) Event 1. A Call For Fire message has
has been selected (ARTY MSN - been transmitted.
SHIFT LASE RND Option, Figure 4- (2) Event 2. A machine generated
115) and the HOG capability is acknowledgment (ACK) has been
disabled providing MMS control. The received.
CPG now designates where the (3) Event 3 . The m i s s i o n has been
rounds impacted. The coordinates of accepted. The message also indicates
the designated area and the target
how the mission is to be accomplished,
number are displayed at the lower
e.g., type and number weapon.
left corner of the MFD above the
(4) Event 4. The ARTY unit has indicated
MODE A and B buttons after the
laser designation is completed. that they have configured their weapon
and are waiting for the command to
commence initiate firing. (Note the
(b) Upon c o m p l e t i o n o f t h e l a s e r
CONTROL box.)
designation task, the CPG must (5) Event 5. The operator has pressed the
press the Freeze Frame switch to
Freeze Frame switch to display the
activate the Control capability. When
Control options.
the Control capability is activated,
(6) Event 6. The Fire Command has been
the CONTROL box changes to
sent.
provide additional options (ARTY
(7) Event 7. A machine generated
MSN - SHIFT LASE Pop-up, fig. 4-
115). These options allow the acknowledgment (ACK) has been
operator to send a message with the received.
lased coordinates, go to the laser (8) E v e n t 8 . T h e A R T Y u n i t h a s
designation mode, or abort the commenced firing.
current effort. If SEND is selected, (9) Event 9. The ARTY unit has sent a
the mission status changes to SHIFT message indicating that all artillery
SENT and the CONTROL box shown rounds should now be hitting the target.
i n F i g u r e 4 - 1 1 5 ( A R T Y MSN (10) Event 10. A message has been
( C O N T R O L / R N D S C M P ) ) i s received that indicates all rounds have
d i s p l a y e d . I f LASE AGAIN i s been fired. (Note that CONTROL has
selected, the display returns to that been turned over to the crew.)
shown in Figure 4-115 (ARTY MSN (11) Event 11. The operator has pressed the
with SHIFT Selected). If ABORT is Freeze Frame switch to display the
selected, display changes to reflect Control options.
CONTROL box shown in Figure 4- (12) Event 12. The operator has selected
115 (ARTY MSN (CONTROL/RNDS the EOM&S option.
CMP)). (13) Event 13. The operator has sent an
EOM message.
c. Typical ARTY Mission Example. Figure 4- (14) Event 1 4 . A machine g e n e r a t e d
116 provides an example of a typical ARTY acknowledgment (ACK) has been
Fire Mission. This example shows how a received.
mission starts with a Call For Fire message, (15) Event 15. The CDS has confirmed that
progresses through the events that occur, the mission is complete. At this point
and finishes with the mission complete the operator clears the mission (R-1),
message. Each MFD display represents a making the mission buffer available for
separate event. a new mission.
4-249
TM 1-1520-248-10
PULL
MAN
PULL
BKUP
BRT
C
ONT
HSD COMM
300 330 N 030 060 E
VSD
W
SAF>H
=12
=03
CLR
MSN
CHECK
FIRE
SEND
A AGAIN
4600
ARM TAC 2X
PNT TRK MMS
< ARTY#1 READY
TOF:0S
CONTROL
PULL
MAN
PULL
BKUP
BRT
C
ONT
HSD COMM
300 330 N 030 060 E
VSD
W
SAF>H
=12
=03
CLR
MSN
CHECK
FIRE
SEND
A AGAIN
4600
ARM TAC 2X
PNT TRK MMS
< ARTY#1 READY
TOF:45S
CONTROL
FIRE 0
PULL
MAN
PULL
BKUP
BRT
C
ONT
HSD COMM
300 330 N 030 060 E
VSD
W
SAF>H
=12
=03
CLR
MSN
CHECK
FIRE
SEND
A AGAIN
4600
ARM TAC 2X
PNT TRK MMS
PULL
MAN
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(40)