曝光臺 注意防騙
網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者
BKUP
BRT
C
ONT
RAPID
VSD HSD MMS COMM
PULL
MAN
PULL
BKUP
BRT
C
ONT
RAPID
VSD HSD MMS COMM
ALF
GL
ON
OFF
WPN
ASE
IDM IMAGE
CAPTURE
TIS INTEG
INCR
ON
LMC
ON
ALE
ON
OFF OFF OFF
INIT
START PAGE 2
>TEST-"T"
NO GO
GO
TEST
NETS XXXX
SUBS
AUTH
RAPID
2/3
MSGS
MVT
BULK
>
START PAGE 1
>
>
>
>
>
> ORIG-?
1/3
##:##-TIME
>
>
* TYPE:MENU
AUTO SHOT-OFF
SERIALIZE MSGS
406900-23
J0829
START PAGE 3
3/3
>
ZEROIZE
ON:AUTO POS
TEAM-??
BC-??
CURR NETS
Figure 4-77. IDM Initialization Pages
4-155
TM 1-1520-248-10
9. MVT key If desired, press to access Preset NOTE
Movement Message pages. Enter movement
commands on subpages. Press R-1 key as RADIO selection at L-4 selects the NET
required to return to Start page. transmission radio. The radio selected to
receive net traffic need not be the same.
10. BULK key Press if it is desired to upload
another operator IDM. b. RADIO 1 through RADIO 4 keys Press
one of the keys and use the MFK to type in
the desired net number for each radio to
a. Enter Destination ID by pressing L-1. receive.
b. Press L-2 to access Bulk Data Select page. c. RTN key Press.
Making a selection causes a default back to
Bulk Data Summary page. d. ORIG key Enter subscriber identifier.
c. SEND; then scroll to next page. Utilize the e. TEAM key Enter team number.
SCROLL-SEND procedure until all desired
data has been sent. f. BC key Enter broadcast number.
d. COMPLETE Send COMPLETE message NOTE
when finished with bulk data transmission.
Time of day is automatically input by GPS.
11. IDM switch Press. g. TIME key Enter current time of day only if
GPS fails.
a. Start key Press.
4-134. AIR REQUEST PAGES. b. Paging key Press to display 3/3.
a. Description. The Air Request (AIR REQ) list
c. L-1 key Press to scroll through Rapid can store up to eight air mission fire requests. The
function selections. Select desired function. three index pages display observer mission number,
type of ordnance, firing element (subscriber) to which
d. L-3 key Press to toggle between AUTO request was sent, and mission status. This list is for
SHOT on and off. AUTO SHOT does not originating mission requests. Incoming new missions
function in this installation. are stored in the Received Message file. Stepping
through the mission list is accomplished by pressing
the paging (upper right) key on the MFD. Accessing a
e. L-4 key Press to access Serialization stored Air Mission Request Summary page i s
Subscriber Assignment page. accomplished by pressing the left key adjacent to
(1) L-1 key Press to toggle between desired mission. Complete mission information will
XMT and NONE. d i s p l a y . I n i t i a t i n g a new m i s s i o n r e q u e s t i s
(2) L-2 key Press to enter desired accomplished by pressing a NEW key of an available
subscribers. mission number on the Air Request list, selecting air
(3) L-4 key Press to scroll through mission type, entering the required parameters,
subscribers to read initial serialization receiving the summary, and transmitting the data.
count of messages.
(4) R-4 key Press to edit/enter initial b. Types of air missions are as follows:
serialization count of messages.
(5) R-1 key Press to return to Start page (1) HELLFIRE wherein the number of rounds to
3/3. be fired is requested and guidance is by other than the
launching element.
12. Select IDM Press. Then select Start page (2) OTHER ORDNANCE wherein there are seven
1/3. selections, NO PREF, ATGM, GUN, HE, ILLUM,
SMOKE, and CHAFF.
a. CURR NETS key Press. (3) NO PREF.
4-156
TM 1-1520-248-10
4 - 1 3 5 . STORING OR EXECUTING A I R • The Mission Status will change from
MISSION FIRE REQUEST. REQUESTED to ACCEPTED, READY,
FIRE, and SHOT. At completion of
To store an air mission fire request, perform steps 1 mission an END OF MISSION message
through 7. should be sent.
• A generic Air Mission Summary page is
1. Target locate steps Accomplish as shown in fig. 4-79.
required.
2. IDM switch Press as required to display 4-136. ARTILLERY REQUEST PAGES.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：
OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(5)
