曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

displayed. When the ALTITUDE switch is in RDR, radar altitude is displayed
and is identified by an R next to the altitude. If the radar altitude is invalid,
barometric altitude will be displayed and a B next to the altitude will be
flashed to indicate that barometric altitude is being displayed rather than
radar altitude. The bottom of the altitude box is positioned at the waterline
reference position.
0
BAR0 pressure setting Enables display of the barometric pressure setting used by the display
pushbutton system and the weapon system. Successive depression of the pushbutton
will cause the setting to alternately appear and disappear.
@
Barometric pressure The barometric pressure setting used by the display system and the
setting weapon system is the value set via pilots barometric altimeter. When the
BAR0 setting is changed, the BAR0 setting will be momentarily displayed
for 5 seconds after the change is made.
69
DEST steering Enables selection of the destination steering mode.
pushbutton
63
D/L steering pushbutton Enables selection Of the data link steering mode.
0 Course select setting Indicates the magnetic course selected by the pilot via the COURSE knob.
0 DCL pushbutton In TLN, selection of the declutter button removes the airspeed Mach
number, altitude, vertical velocity and heading and course line settings,
and adds waterline reference indicators. Selection of the declutter option is
indicated by a box around the pushbutton.
Figure 2-108. MFD VDI Formats - Takeoff, Landing, Navigation (Sheet 2 of 9)
ORIGINAL 2-200
NAVAIR 0%FI4AAD-I
SYMBOL FUNCTION
0 Bank scale Provides indication of bank angle to 60”. Marks are provided at O”, 9,
lo”, 20”, 30°, 45” and 60”.
@
ECM display Enables the presentation of the threat display. Once depressed,
pushbutton subsequent depression of the ECM pushbutton will return the display to
the VOI display. This will permit a quick look at the threat display and
provide a quick return to the VDI display.
0
MENU display Depression of menu will result in the MENU list to appear in the border
pushbutton area of the VDI display for subsequent selection.
63
Bank angle pointer Moving pointer provides indication on aircraft bank angle. At bank angles
in excess of 65” the pointer will be removed from the display.
0
SMS display Enables the presentation of the SMS display. Once depressed,
pushbutton subsequent depressing of the SMS pushbutton will return the display to
the VDI display. This will permit a quick look at the SMS display and
provide a quick return to the VDI display.
53
Heading select setting Indicates the magnetic heading selected by the pilot.
53
TCN steering Enables selection of the tacan steering mode.
pushbutton
53 Ground plane The dark shaded ground plane.
53 MAN pushbutton Enables selection of the manual steering mode.
@
Waterline reference dot In TLN, fixed dot appears at the optical center to denote the waterline
reference position.
23
Horizon Denotes demarcation between the ground and the sky. It represents the
horizon with respect to the aircraft and changes orientation with any
change in aircraft pitch or roll.
@ Airspeed
@
Mach number
32 6 AWL steering
pushbutton
Provides display of indicated airspeed. The bottom of the airspeed box is
positioned at the waterline reference position.
Provides display of aircrafl speed in math to the nearest hundredth.
Enables selection of the all weather landing (AWL) steering mode.
Selection permits option to display either ACL, ILS, both or no steering
information on the VDI and/or HUD.
Note
With VDI on MFD 3, AWL selection is possible, but
deselection is inhibited.
Figure Z-108. MFD VDI Formats - Takeoff, Landing, Navigation (Sheet 3 of 9)
2-201 ORIGINAL
NAVAIR 01.F14AAD-1
SYMBOL
@ Flight path marker
FUNCTION
The vertical position of the flight path marker with respect to the flight path
ladder indicates the vertical flight path angle of the aircraft.
a
Sky plane The shaded area represents the sky.
TLN TACAN STEERING Note
The following changes or additions occur when tacan
steering is selected.
0
Command heading Command heading marker is positioned relative to the magnetic heading
marker scale. Where commanded heading is beyond display scale limits, the
marker will be pegged at the edge nearest to the commanded heading.
0
Tacan range Indicates distance to the selected tacan station.
0 Course arrow The course arrow represents the pilot selected course to the tacan station.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：F-14D 飛行手冊 Flight Manual 1(160)