曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SET pushbunon Pressing the SET pushbutton enables the establishment of a waypoint at
the designated cursor position on the HSD.
@
PLOT pushbutton Pressing the PLOT pushbutton enables/disables the display of plotted lines
between waypoints on the HSD waypoint format.
0
Selected course line Moves within the compass rose to depict the selected tacan course during
tacan steering.
G3
AWL pushbutton The AWL display is enabled by this pushbutton.
3
CDI pushbutton The course deviation indicator (CDI) display is enabled by this pushbutton.
23 Course line setting With the command pointer set, the CSEL readout indicates the magnetic
course setting in degrees.
Figure 2-l 17. MFD HSD Tacan Displays (Sheet 2 of 2)
displays a format to which the DEU cannot slave, the 5. NAV AID - Navigation aid.
DEU remains on whatever format it is displaying. Gpcrating
in the independent mode enables access to all 6. NAV GRID - Navigation grid.
menu options without being a&ted by changes to the
h4FD3 display. When the MENU option key is pressed, 7. JMD RNAV - JTIDS relative navigation.
tbe main MENU page is displayed with the present DEU
mode displayed on the scratchpad. 8. JTID COMh4 - JTIDS communications.
2.34.2 DEU Menu Pages. TheDEUconsistsofthe 9. JTID PPLI - JTIDS precise participant location
following menu pages. identification.
2.34.2.1 Main Menu Page. The main menu page 10. JTIDS MODE - JTIDS mode.
(Figure 2-121) enables access to the various subpages.
Pressing the desired option key on the main menu dis- 11. DOWN LOAD - JTJDS initialization.
plays the desireds ubpage.T he subpagesa re as follows:
12. IFT - Nontimctional.
1. SMS - Stores management system.
13. PLOT - Plot.
2. OWN A/C - Own aircraft.
14. CSS - Cooperative support software.
3. WPT - Waypoint.
15. SLViINDP - Slave/independent.
4. CV ALGN - Carrier align.
16. ALT MENU - When available.
2-227 ORIGINAL
NAVAIR 01.F14AAD-1
SYMBOL
a Tacan Course indication
0 Course deviation scale
0 CDI pushbutton
FUNCTION
ndicates tacan course and deviation from tacan track.
Xsplays deviation from selected course. Each dot represents 4 degrees.
3oxed CDI legend indicates that tacan CDI display has been selected.
Xsplays deviation from selected course against deviation scale.
Figure 2-118. HSD Tacan CD1 Format
ORIGINAL 2.228
NAVAIR Of-FI4AAD-1
CAP/ATTACK CONFIGURATION WINGFORM
FIGHTER CONFIGURATION WINGFORM
Figure 2-119. MFD SMS Format - CAP/Attack, Fighter Wingform (Sheet 1 of 2)
2-229 ORIGINAL
NAVAIR OW14AAD-I
SYMBOL
0 ;yEF status
0
Rounds remaining
FUNCTION
SAFE or ABM is displayed to indicate the status of the master arm switch.
Rounds remaining is indicated in hundreds (6,5, 4,3. 2, 1 and 0) by a
single digit. An X will appear when the gun is empty. HI or LO indicates the
rate at which the rounds are fired.
03 HI/LO gun rate Enables the selection of the HI or LO rate of gun fire. HI rate is default
pushbutton mode. Pressing the pushbutton will toggle rate of fire between HI and LO.
@
PGUlM56 Enables selection of PGU or M56 round. Pressing the pushbutton will
toggle between PGU and M56.
0
Store station numbers Indicate the location of the stores (weapons and fuel tanks) carried on the
(lA,lB.2.3.45,6,7, aircraft.
6A, and 6B)
@
Manual (MAN) gun Enables manual selection of the manual option during air-to-ground
mode pushbutton operations. CCIP mode is the primary gun mode and is obtained
(A/G only) immediately upon gun selection. A box will appear around the pushbutton
legend to indicate the manual option has been selected. Refer to NAVAIR
01-F14AAD-IA.
0
Missile status (MS) Enables the presentation of the missile status display.
pushbutton
@
CAP/attack wingform Wingform provides a plan view of the stores carried on an aircraft
configured for the CAP/attack role.
@
SMS pushbutton
@ Fighter wingform
Box around the SMS pushbutton legend indicates the SMS display is
selected. Once selected, a subsequent depression of the SMS pushbutton
will enable the return to the previous display.
Wingform provides a plan view of the stores carried on an aircraft
configured for the fighter role.
Figure 2-l 19. MFD SMS Format - CAP/Attack, Fighter Wingforms (Sheet 2 of 2)
ORIGINAL 2-230
Figure 2-120. MFD Engine Monitor Format (Sheet 1 of 2)
ORIGINAL
NAVAIR Q1-F14AAD-I
SYMBOL
( 3~ Rotor speed
I FUNCTION
Left and right rotor speeds (Nl) are displayed both in an analog and digital
format in percent RPM. The digital indications are located immediately
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：F-14D 飛行手冊 Flight Manual 1(169)