(2)
 Adjust the temperature simulating devices until on the ECAM lower DU the CKPT, the FWD cabin and the AFT cabin temperatures show 16 deg.

 C.

 (3)
 On the AIR COND panel 30VU make sure that:

 (a)
 The COCKPIT, the FWD CABIN and the AFT CABIN temperature
 selectors are at the 12 o'clock position.

 (b)
 The X BLEED selector is at the AUTO position.

 (4)
 On the CARGO HEAT panel 22VU push the CAB FANS pushbutton switch to the off position (the OFF legend comes on).

 (5)
 On the AIR COND panel 30VU:

 (a)
 Push the APU BLEED pushbutton switch to the on position (the ON legend comes on).

 (b)
 Push the PACK 1 and the PACK 2 pushbutton switches to the on position (the FAULT and the OFF legends show off).

 (6)
 After 3 minutes:

 (a)
 On the CARGO HEAT panel 22VU and the AIR COND panel 30VU push the HOT AIR pushbutton switches to the off position (the OFF legends come on).

 (b)
 Turn the COCKPIT, the FWD CABIN and the AFT CABIN temperature selectors to the HOT position.

 (7)
 Wait for 15 minutes. NOTE : During this 15 minute period you must constantly monitor the

____
 pack temperatures.

 (8)
 To do this you must:

 (a)
 On the ECAM control panel push the BLEED pushbutton switch.

 (b)
 On the ECAM lower DU make sure that:

 -
the pack compressor outlet temperature does not go above 230 deg. C (max.) and

 -
the pack outlet temperature does not go above 85 deg. C (max). NOTE : If the temperatures go above max. you must stop the

____ procedure and do the trouble shooting of the ECS (refer to TSM, chapter 21).
 (9) On the ECAM control panel push the COND pushbutton switch.
 1EFF : ALL 1 21-00-00Page 250 1 1 Aug 01/05R 1 1 1CES 1

 (10)
 Adjust the temperature simulating devices until on the ECAM lower DU the CKPT, the FWD cabin and the AFT cabin temperatures show 30 deg.

 C.

 (11)
 On the AIR COND panel 30VU turn the COCKPIT, the FWD CABIN and the AFT CABIN temperature selectors to the COLD position.

 (12)
 Wait for 15 minutes. NOTE : During this 15 minute period you must constantly monitor the

____ pack temperatures as in work step 7 of this paragraph.

 (13)
 On the ECAM control panel push the COND pushbutton switch.

 (14)
 Adjust the temperature simulating devices until on the ECAM lower DU the CKPT, the FWD cabin and the AFT cabin temperatures show 16 deg.

 C.

 (15)
 On the AIR COND panel 30VU turn the COCKPIT, the FWD CABIN and the AFT CABIN temperature selectors to the HOT position.

 (16)
 Wait for 15 minutes. NOTE : During this 15 minute period you must constantly monitor the

____ pack temperatures as in work step 7 of this paragraph.
 Subtask 21-00-00-860-063
 Q. Do the Procedure to Stop the APU
 -
(Ref. TASK 49-00-00-860-004) or,

 -
(Ref. TASK 49-00-00-860-006) or,

 -
(Ref. TASK 49-00-00-860-009).

 1EFF : ALL 1 21-00-00Page 251 1 1 Aug 01/05R 1 1 1CES 1

 Subtask 21-00-00-865-066
 R. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R  **ON A/C 401-499,
 49VU AIR COND/TEMP CTL/SYS 1 CHAN B/28VDC  52HH  D08
 **ON A/C ALL
 121VU APU/APU/CTL 121VU APU/ECB/SPLY  2KD 1KD  L42L41 
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R  122VU AIR COND/PACK TEMP/CTL SYS1/2/115VAC 122VU AIR COND/PACK TEMP/CTL SYS1/2/28VDC 122VU AIR COND/PACK TEMP/CTL SYS1/1/115VAC 122VU AIR COND/PACK TEMP/CTL SYS1/1/28VDC 122VU AIR COND/PACK TEMP CTL SYS2/2/28VDC 122VU AIR COND/PACK TEMP CTL SYS2/2/115VAC  21HH 23HH 1HH 3HH 24HH 22HH  W22W21X22X21Y21Y20 
R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302, 
R  122VU AIR COND/PACK TEMP CTL SYS2/1/28VDC  4HH  Y19 
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399, 
R  122VU AIR COND/PACK TEMP CTL SYS2/1/115VAC  2HH  Y18 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AIR CONDITIONING 空調 1(75)