-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 25.380 | 25.393 | | | 25.350 | | | | OD 2 |(0.9992) |(0.9997) | | |(0.9980) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | E | 25.400 | 25.433 | | | | 25.463 | | | ID 1 |(1.0000) |(1.0012) | | | |(1.0024) | | -------------------------------------------------------------------------------
Subtask 27-64-45-220-061
 N. Dimensions of the Spoiler 5
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 19.030 | 19.043 | | | 19.000 | | | | OD 3 |(0.7492) |(0.7497) | | |(0.7480) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | E | 19.050 | 19.083 | | | | 19.113 | | | ID 2 |(0.7500) |(0.7512) | | | |(0.7524) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-64-45Page 614 1 1 Feb 01/03R 1 1 1CES 1

 Subtask 27-64-45-220-062
 P. Dimensions of the Spoiler 5
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 19.030 | 19.043 | | | 19.000 | | | | OD 3 |(0.7492) |(0.7497) | | |(0.7480) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | E | 19.050 | 19.083 | | | | 19.113 | | | ID 4 |(0.7500) |(0.7512) | | | |(0.7524) | | -------------------------------------------------------------------------------
Subtask 27-64-45-220-063
 Q. Dimensions of the Spoiler 5
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.

 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 22.152 | 22.185 | | | 22.102 | | | | OD 4 |(0.8721) |(0.8734) | | |(0.8701) | | | | | | | 0.027 | 0.073 | | | 0.173 | | | | | (0.0010)| (0.0028)| | |(0.0068)| | E | 22.212 | 22.225 | | | | 22.275 | | | ID 5 |(0.8744) |(0.8750) | | | |(0.8769) | | -------------------------------------------------------------------------------
Subtask 27-64-45-220-064
 R. Dimensions of the Spoiler 5
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 7.899 | 7.924 | | | 7.880 | | | | OD 1 |(0.3109) |(0.3120) | | |(0.3102) | | | | | | | 0.000 | 0.038 | | | 0.076 | | | | | (0.0000)| (0.0015)| | |(0.0029)| | F | 7.924 | 7.937 | | | | 7.956 | | | ID 2 |(0.3120) |(0.3125) | | | |(0.3132) | | -------------------------------------------------------------------------------
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱7(10)