3. Job Set-up
__________
 (Ref. Fig. 401/TASK 27-64-51-991-006)
 **ON A/C 001-003, 051-052,

 (Ref. Fig. 402/TASK 27-64-51-991-007) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 402A/TASK 27-64-51-991-007-A)
 **ON A/C ALL

 Subtask 27-64-51-941-058
 A. Safety Precautions
 (1)
 Make sure that the safety barriers are in position.

 (2)
 Make sure that the warning notice is in position to tell persons not to pressurize the hydraulic systems.

 (3)
 Make sure that the warning notice is in position to tell persons not to pressurize the hydraulic reservoirs.

 (4)
 Make sure that the warning notice is in position to tell persons not to operate the flight control surfaces.

 Subtask 27-64-51-860-053-A
 B. Aircraft Maintenance Configuration
 (1)
 Make sure that the flaps are fully extended (Ref. TASK 27-50-00-866-008).

 (2)
 Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER is on the slat/flap control lever.

 (3)
 Make sure that the applicable hydraulic system and hydraulic reservoir are depressurized:

 -
FOR 31CE1, 31CE2, 31CE9, 31CE10 the Green Hydraulic system (Ref. TASK 29-10-00-864-001) and the Green Hydraulic reservoir (Ref. TASK 29-14-00-614-001)

 -
FOR 31CE3, 31CE4, 31CE7, 31CE8 the Yellow Hydraulic system (Ref. TASK 29-10-00-864-002) and the Yellow Hydraulic reservoir (Ref. TASK 29-14-00-614-001)

 -
FOR 31CE5, 31CE6 the Blue Hydraulic system (Ref. TASK 29-10-00-864-003) and the Blue Hydraulic reservoir (Ref. TASK 29-14-00-614-001).

 (4)
 Make sure that the access platform is in position at the correct zone:

 -
FOR 31CE1
 below zone 582

 -
FOR 31CE2
 below zone 682

 -
FOR 31CE3
 below zone 583

 -
FOR 31CE4
 below zone 683

 -
FOR 31CE5
 below zone 584

 -
FOR 31CE6
 below zone 684

 -
FOR 31CE7
 below zone 585

 -
FOR 31CE8
 below zone 685

 -
FOR 31CE9
 below zone 586

 -
FOR 31CE10
 below zone 686.

 (5)
 Make sure that the correct access panel is removed (Ref. TASK 57-51-37-000-002) (Ref. TASK 57-51-37-000-004):

 -
FOR 31CE1
 573BB

 -
FOR 31CE2
 673BB

 -
FOR 31CE3
 575BB

 -
FOR 31CE4
 675BB

 -
FOR 31CE5
 575DB

 1EFF : ALL 1 27-64-51Page 423 1 1 Feb 01/03R 1 1 1CES 1

 -
FOR 31CE6
 675DB

 -
FOR 31CE7
 575EB

 -
FOR 31CE8
 675EB

 -
FOR 31CE9
 575GB

 -
FOR 31CE10
 675GB.

 (6)
 Make sure that the applicable spoiler is extended and supported with the STRUT SUPPORT - SPOILER 1 (98D27604002000) or the STRUT SUPPORT -SPOILER 2, 3, 4, AND 5 (98D27604001000).

 (7)
 Make sure that the container is below the hydraulic unions of the applicable spoiler servo-control.

 (8)
 Put the SPOILER MAINTENANCE KEY (98D27603002000) or the SPOILER MAINTENANCE KEY (98D27603002001) into the maintenance device of the applicable spoiler servo-control and turn it to the maintenance position.

 Subtask 27-64-51-865-061
 C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08 49VU FLIGHT CONTROLS/FLP/CTL AND MONG/SYS1 6CV B07 49VU HYD/HYD PWR/B WARN/& CTL 2702GJ C12 105VU FLT CTL/SEC1/STBY SPLY 22CE B01 121VU HYDRAULIC/SOL VALVES/G/Y/PTU 1801GL N34 121VU HYDRAULIC/HYD POWER/Y 3803GX N30 121VU HYDRAULIC/Y HYD/PUMP ENG2/MONG 3700GD Q37 121VU FLIGHT CONTROLS/FLP/CTL AND/MONG/SYS2 8CV Q21 121VU FLIGHT CONTROLS/SEC3/SPLY 21CE3 Q19 121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18 121VU HYDRAULIC/G HYD/PUMP ENG1/CTL 1701GK R35 121VU HYDRAULIC/G HYD/PUMP ENG1/MONG 1702GK R34 123VU B HYD/ELEC PUMP 2701GJ AB09 123VU Y HYD/ELEC/PUMP 3802GX AB06 123VU Y HYD/ELEC/ELEC PUMP/NORM 3801GX AB03
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱7(21)