(2)
 Make sure that the RAT extends.

 (3)
 Install the protective covers on the turbine blades.

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 210 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1

 RAT Control
 Figure 202/TASK 29-22-00-991-019

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 211 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1 TASK 29-22-00-869-006

 Retraction of the Ram Air Turbine (RAT) on the Ground
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 To retract the RAT after a maintenance or test procedure.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 COVER - PROTECTION 98D29208246001 1 SAFETY DEVICE - RAT
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-10-00-863-003 Pressurize the Blue Hydraulic System with a Ground
 Power Supply 29-10-00-864-003 Depressurize the Blue Hydraulic System 29-22-00-860-007 Installation of the Safety Device of the Ram Air
 Turbine
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 212 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

29-22-00-860-008 Removal of the Safety Device of the Ram Air Turbine 29-22-53-000-010 Removal of the RAT Ejection Jack (1GE) 29-22-53-400-010 Installation of the Ejection Jack (1GE) 29-22-00-991-019 Fig. 202
 3. Job Set-up
__________ Subtask 29-22-00-860-100
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the warning notices are in position.

 (2)
 Make sure that the safety barriers are in position.

 (3)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (4)
 Pressurize the Blue hydraulic system
 (Ref. TASK 29-10-00-863-003).

 Subtask 29-22-00-865-103
 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU HYD/RAT/CTL 2801GE D14
 Subtask 29-22-00-010-077
 C. Open the access doors 197EB and 195BB.
 4. Procedure
_________ Subtask 29-22-00-860-101
 A. Retraction of the RAT on the Ground
 (Ref. Fig. 202/TASK 29-22-00-991-019)

 WARNING : MAKE SURE THAT THE RAT TRAVEL RANGE IS CLEAR BEFORE YOU
_______
 EXTEND/RETRACT THE RAT.

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-00Page 213 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1

 (1)
 Make sure that a second person is on the ground near the RAT to monitor its retraction.

 (2)
 Open the door of the RAT ground control-panel 3GE.

 (3)
 Remove the COVER - PROTECTION from the turbine blades.

 (4)
 Turn the turbine blades with your hands until the arrows on the turbine hub and the gearbox align.

 (5)
 On the RAT ground control-panel 3GE, set the switch 28V DC to the ON position.

 (6)
 Retract the RAT CAUTION : MAKE SURE THAT THE RAT IS RETRACTED COMPLETELY BEFORE YOU

_______ RELEASE THE "RAT STOW" SWITCH . IF THE RETRACTION SEQUENCE STOPS JUST BEFORE THE RAT ENTERS THE BAY IN THE FAIRTING THIS WILL CAUSE DAMAGE TO THE RAT ACTUATOR.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓5(107)