SHELL INTERNATIONAL TRADING COMPANY IN'L AVIAT. DIVISION SHELL CENTRE LONDON SE1 ENGLAND
SHELL CHEMICAL COMPANY 1 SHELL PLAZA PO BOX 2463 HOUSTON, TX 77002 USA
SHELL CHIMIE 27 RUE DE BERRI 75380 PARIS CEDEX 08 FRANCE
WITCO CHEMICAL CORP. SONNEBORN DIV. 400 N. MICHIGAN AVENUE CHICAGO, IL 60611 USA
WITCO BV PO BOX 5 KOOGAN DE ZAAN THE NETHERLANDS
LOCAL PURCHASE
CASTROL INDUSTRIES66 ROUTE DE SARTROUVILLE 78230 LE PECQ FRANCE
CASTROL NORTH AMERICA 16715 VON KARMAN AVE. SUITE 230 IRVINE, CA 92714 USA
CASTROL INDUSTRIES66 ROUTE DE SARTROUVILLE 78230 LE PECQ FRANCE
CASTROL NORTH AMERICA 16715 VON KARMAN AVE.
F 『 EEFF : ALL E Page 22670-30-00
E E May 01/05 ERE
ECES E -------------------------------------------------------------------------------CODE No. DESCRIPTION SUPPLIER -------------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
SUITE 230 IRVINE, CA 92714 USA
NYCO 51 RUE DE PONTHIEU 75008 PARIS, FRANCE
SHELL INTERNATIONAL TRADING COMPANY IN'L AVIAT. DIVISION SHELL CENTRE LONDON SE1 ENGLAND
SHELL CHEMICAL COMPANY 1 SHELL PLAZA PO BOX 2463 HOUSTON, TX 77002 USA
SHELL CHIMIE 27 RUE DE BERRI 75380 PARIS CEDEX 08 FRANCE
CP8001 Safetywire Local Purchase AMS5687
ADAMS INDUSTRIES INC. PO BOX 291 WINDSOR LOCKS, CT. 06096 USA
CP8002 Safetywire Local Purchase AMS5689
ADAMS INDUSTRIES INC. PO BOX 291 WINDSOR LOCKS, CT. 06096 USA
CP8003 Gudebrod 718U GUDEBROD INC. MIL-T-43435B POTTSOWN, PA 19464 USA
MOTEX 39 RUE DE VERDUN 94170 LE PERREUX SUR MARNE
F 『 EEFF : ALL E Page 22770-30-00
E E May 01/05 ERE
ECES E -------------------------------------------------------------------------------CODE No. DESCRIPTION SUPPLIER -------------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
CP8004 Safetywire 0.024 in. (0.6 mm) AFNOR code NC15FE US SPEC AMS 5687
CP8005 Safetywire 0.024 in. (0.6 mm) AFNOR code Z10CNT 18 US SPEC AMS 5689
CP8006 Safety cable 0.032 in. (0.8 mm) US SPEC M50 TF 9 C1-A
FRANCE
Local Purchase
ADAMS INDUSTRIES INC. PO BOX 291 WINDSOR LOCKS, CT. 06096 USA
Local Purchase
ADAMS INDUSTRIES INC. PO BOX 291 WINDSOR LOCKS, CT. 06096 USA
BERGEN CABLE TECHNOLOGIES GREGG STREET POBOX 1300 LODI, NJ 07644 USA
DANIELS MANUFACTURING CORP. 536 THORPE ROAD ORLANDO, FL 32824 USA
F 『 EEFF : ALL E Page 22870-30-00
E E May 01/05 E E ECES E FLUORESCENT PENETRANT INSPECTION - PORTABLE - WATER WASHABLE
F 『
E C F M E
E E
E 56-5B E
E E
____________________________________________________________ MAINTENANCE PRACTICES
_____________________
TASK 70-51-00-230-002
Fluorescent-Penetrant Inspection-Portable-Water Washable
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
Not Applicable
3. Job Set-up__________
Subtask 70-51-00-869-054
A. Fluorescent-penetrant inspection - General.
(1) This is water washable fluorescent-penetrant inspection process intended for inspections at remote locations. Portable fluorescent-penetrant inspection is a localized process, limited to small areas or spot inspection of specific areas of parts. It is not intended for normal inspection. It is convenient to use for inspection of welded or other localized repair areas. The penetrant is applied only to a local area that needs to be inspected.
(2) If visible non-fluorescent color dye penetrant has been used on parts which are to be subsequently inspected with fluorescent penetrants, the contamination by the dye may prevent reliable fluorescent-penetrant inspection. Any color dye indications evident by white light visual inspection shall be considered valid indications even if not detectable by ultraviolet light.
(3) Titanium alloy parts are subject to stress corrosion cracking when residues of halogen containing compounds remain on a part that is subsequently subjected to elevated temperatures typical or welding, heat treating, or engine operation. These parts must be thoroughly cleaned with halogen-free compounds after exposure to any halogen containing compound to prevent the cracking and possible failure of parts. When using water for processing parts made of titanium or titanium alloy, de-ionized water must be used. 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES - ENGINES(20)
