F 『
E C F M E
E E
E 56-5B E
E E
POWER PLANT WIRE SPLICE REPAIR PROCEDURE - DESCRIPTION AND OPERATION
____________________________________________________________________
1. General
_______
- This repair procedure has been prepared to define wire repair limits for temporary on-wing repairs to damaged electrical harnesses. The procedure also defines the repair methods for the various types of harness construction.
- When it is not possible to remove a damaged wire from a harness this
procedure may be used to join the damaged wire by splicing. R - This procedure has been prepared as a temporary on wing repair. The repair R must be monitored at A-Check and a permanent repair must be incorporated R at the next available time period, but not later than the next C-Check. R
- Wire splice repairs are considered allowable temporary repairs. The defective wire or wires must be replaced as specified in the repair limits shown in step 5. Wires which cannot be repaired within the limits of step 5 must be replaced.
2. Tools and Equipment
___________________
----------------------------------------------------------------------------| REFERENCE | DESIGNATION | VENDOR | ----------------------------------------------------------------------------| MR-8-89-1 | Crimp tool, regular wire splice | V03612 | | 46447 | Crimp tool, thermocouple splice | V00779 | | 45092 | Stripper, master wire | V30119 | | No specific | Scissors | Commercial | | No specific | Knife, utility | Commercial | | No specific | Cutter, wire | Commercial | ---------------------------------------------------------------------------
3. Consumable Material
___________________
----------------------------------------------------------------------------| REFERENCE | DESIGNATION | VENDOR | ----------------------------------------------------------------------------| CP1041 | Alcohol, isopropyl | Commercial | | BS168 | Splice, regular insulated 16-22 AWG wire| V03612 | | 322326 | Splice, thermocouple, parallel type | V00779 | | | nickel | | | 2-323876-2 | Splice, thermocouple, butt type alumel | V00779 | | 2-323876-3 | Splice, thermocouple, butt type chromel | V00779 | | HM352 | Tape, insulating, high temperature | V71643 | | P423 | Tape, insulating, high temperature | V99742 | | 190L0F21G/A | Tape, tying fiberglass MIL-T-43435 | V00768 | | | type 4 | | | 23 X TZ | Tape, tying fiberglass MIL-T-43435 | V82110 |
F 『 EEFF : ALL E Page 170-71-17
E E Feb 01/05 E E ECES E ----------------------------------------------------------------------------| REFERENCE | DESIGNATION | VENDOR | ----------------------------------------------------------------------------| | type 4 | | ----------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
4. Reference Information
_____________________
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
70-71-46 Engine Harness Continuity and Resistance Tests
Section 92-20 AWL Master Wire List
5. Splice Repair Limits
____________________
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES - ENGINES(27)
