(5)
 goes through the slot outside.

 (c)
 Install the white wire in the central contact (7) and solder.

R  _______
CAUTION : DO NOT SOLDER THE CONTACT IN THE AIRCRAFT. REMOVE THE R BUNDLE AND DO THE REPAIR IN THE WORKSHOP.
 (d) Engage the central contact (7) into the dielectric (8).

20-44-39 Page 1

 Miscellaneous Coaxial Connectors - Layout
 E0295
 Figure 001

20-44-39 Page 2

 Miscellaneous Coaxial Connectors - Wire Stripping, Crimping and Shrinking Tools
 E0295
 Figure 002

20-44-39 Page 3

 Miscellaneous Coaxial Connectors - Soldering Procedure
 E0295
 Figure 003

20-44-39 Page 4

 (e) Engage this assembly into the annular contact (9).
 -Make sure that the brown wire goes through the slot of the annular contact.
 -Solder the brown wire core to the annular contact (9).
 -Push the heat shrinkable sleeve to the braid cone (2) on the braid. Make sure that a maximum of 3.9 mm (0.1535 in.) of the braiding is obeyed. Cut the braiding if necessary to remove any plies on the cone extremities.
 (f) Engage the assembly into the connector body (10). Torque the cap (11) with two spanners to the applicable value.
 -Check the position of the internal insulation through the front of the connector.

20-44-39 Page 5

 ______________________________________________
QUADRAX CONNECTORS - DESCRIPTION AND OPERATION
 _______

1.
 General This chapter concerns description, installation and identification of

 quadrax connectors used on aircraft.
 _________________________

2.
 Structure of the chapters

 A. RJ45 type quadrax connectors (20-44-41)
 B. Miscellaneous quadrax connectors (20-44-49)

20-44-40 Page 1

 _________________________________________________________
 _______1. General
 RJ45 type quadrax connectors installed on aircraft have the codes that follow:
 -ABS0971-003
 ___________2. ABS0971-003
 A. General
 This type of connector is used for computer connections.

 B. P/N identification
 (Ref. Fig. 001)

 ABS0971-003 A 01 | | | | | ------ Wire length code : 01 = 2000 mm (78.74 in.)
R  | | 02 = 4000 mm (157.48 in.) | | | ----------- Particular specification code : A = without | ----------------------- Standard P/N
 C. P/N characteristics
 (1) Temperatures Minimum operating temperature is -55 deg.C (-67.00 deg.F). Maximum operating temperature is 125 deg.C (257.00 deg.F).
 D. Connection It is not possible to connect the RJ45 type connector. This connector is delivered wired.

20-44-41 Page 1

 RJ45 Type Quadrax Connectors - P/N Characteristics and Layout
 ABS0971-003
 Figure 001

20-44-41 Page 2

 ____________________________________________________________
MISCELLANEOUS QUADRAX CONNECTORS - DESCRIPTION AND OPERATION
 _______
1. General
 Miscellaneous quadrax connectors installed on aircraft have the codes that follow:
 -ABS1054
 _______2. ABS1054
 A. P/N identification (Ref. Fig. 001)
 ABS1054  A  0  08  01  A  N
 |  |  |  |  |  |  |
 |  |  |  |  |  |  --- Polarization code
 |  |  |  |  |  |
 |  |  |  |  |  ------- Contact type code : A = Pin
 |  |  |  |  |  : B = Socket
 |  |  |  |  |
 |  |  |  |  ------------ Contact arrangement code
 |  |  |  |
 |  |  |  ----------------- Shell size code
 |  |  |
 |  |  --------------------- Connector type : 0 = Receptacle
 |  |  : 6 = Plug
 |  |

 | ------------------------- Material code : A = Aluminum alloy | --------------------------------- Standard P/N
 B. P/N characteristics
 (1)
 Temperatures Minimum operating temperature is -55 deg.C (-67.00 deg.F). Maximum operating temperature is 200 deg.C (392.00 deg.F).

 (2)
 Contact arrangement code (Ref. Fig. 002)

 C. Associated items
 -ABS1057 backshell
 D. Connection table (Ref. Fig. 003)

20-44-49 Page 1

 Miscellaneous Quadrax Connectors - P/N Identification and Layout
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 3(56)