20-45-11 Page 28
R Illuminated Pushbutton Switch - Connector Polarization System E0417
R Figure 014
20-45-11 Page 29
Illuminated Pushbutton Switch - Connector Contact Arrangement E0417 R Figure 015
20-45-11 Page 30
----------------------------------------------------------------------------R | ECE | KORRY | EATON | FUNCTION | R |----------------------------------------------------------------------------| R | | | 851-30486-510 | Extraction Tool -| R | OUT74 | -| (ex MSC 584-901) | Head from Body | R | | | 58T-101 | | R |----------------------------------------------------------------------------| R | | | 851-30486-506 | Guiding Tool - E0415 Body | R | OUT75 | -| (ex MSC 584-501) | Removal or Installation | R | | | 58T-108 | | R |----------------------------------------------------------------------------| R | OUT217 | 29085-001 | -| Guiding Tool - ABS0951 | R | | | | Removal or Installation | R |----------------------------------------------------------------------------| R | | | 851-30486-507 | Extraction Tool -| R | OUT141 | -| (ex MSC 584-502) | Connector | R | | | 58T-107 | | R |----------------------------------------------------------------------------| R R |OUT87-1 (blue)| | 851-30486-507 | | R | 0.012mdaN | -| (ex MSC 584-510) | | R | to 0.014mdaN | | 58T-106 | | R | (for E0415) | | | | R |---------------------------------------------| | R | POWELL DUFFRYN TLS022 | Screwdriver - Dynamometric | R | + Blade AM DP 27478 SP 0,3 X 3 | | R R |---------------------------------------------| | R |OUT87-2 (Red) | | | | R |0.0085mdaN | -| -| | R | to 0.001mdaN | | | | R | (for ABS0951) | | | | R |--------------------------------------------------------------------------- | R | | Screwdriver - Dynamometric | R | No Specific | Screwdriver | R | | + Blade width 3mm (0.118 in.)| R |----------------------------------------------------------------------------| R | No Specific | Philips screwdriver | R ------------------------------------------------------------------------------R
20-45-11 Page 3120-45-11 Page 32
D. Removal
_______CAUTION : MAKE SURE THAT THE HEAD OF THE PUSHBUTTON SWITCH IS IN THE RELEASED (OUT) POSITION BEFORE YOU REMOVE IT. IF YOU TRY TO REMOVE THE HEAD WHEN IT IS PUSHED (IN), YOU WILL CAUSE DAMAGE TO THE PUSHBUTTON SWITCH.
R (1) Remove the head (ABS0951 or E0418)
R R (a) For E0415 MSC EATON pushbutton switch (Ref. Fig. 016) - Release the head with the tool 58T-101 or 851-30486-510 (ex MSC584-901). The head stays attached to the body by the retainer. - Remove the tool.
R R (b) For E0415 ECE pushbutton switch (Ref. Fig. 017) - Release the head with the tool OUT74. - Remove the tool OUT74. - Insert the screwdriver blade between the body and the retainer. - Lift the retainer slightly in the direction of the arrow until the guide pin comes out of the slot. - Remove the head and retainer assembly.
R R R R R R R (c) For ABS0951 ECE and KORRY pushbutton switch (Ref. Fig. 018) - Release the head with the tool OUT74, 58T-101 or 851-30486-510 (ex MSC584-901). The head stays attached to the body by the retainer (flexible printed circuit). - Remove the tool.
R (2) Replace a lamp (E0530) (only for E0415)
_______CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
R R (a) For E0415 MSC EATON pushbutton switch (Ref. Fig. 016) - Release the head with the tool 58T-101 or 851-30486-510 (ex MSC584-901) The head stays attached to the body by the retainer. - Remove the tool. - Turn the head to get access to the lamps.
R Illuminated Pushbutton Switch - Removal of head and Replacement of lamp R E0415 MCS EATON R Figure 016
20-45-11 Page 33
R Illuminated Pushbutton Switch - Removal of head and Replacement of lamp R E0415 ECE R Figure 017
20-45-11 Page 34
R Illuminated Pushbutton Switch - Removal of head R ABS0951 ECE and KORRY R Figure 018
20-45-11 Page 3520-45-11 Page 36
- Remove the lamp from it housing and install a new lamp.
- Install the head.
R
R (b) For E0415 ECE pushbutton switch
R (Ref. Fig. 017)
- Release the head with the tool OUT74.
- Remove the tool.
- Turn the head to get access to the lamps.
- Remove the lamp from its housing and install a new lamp.
- Install the head.
R (3) Remove the body (ABS0951 and E0415)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 3(68)
