- aircraft wiring (motor 1/open supply) between the ACTUATOR-LP FUEL VALVE, ENG 1 free connector 9QG-A, pin A and the RELAY-ENG/MASTER 1 (11QG), terminal A3
- aircraft wiring (motor 1/ground/earth) between the ACTUATOR-LP FUEL VALVE, ENG 1 free connector 9QG-A, pin E and the ground/earth point 4001VN(521STA332)
- aircraft wiring (motor 2/open supply) between the ACTUATOR-LP FUEL VALVE, ENG 1 free connector 9QG-B, pin A and the RELAY-ENG/MASTER 1 (11QG), terminal B3
- aircraft wiring (motor 2/ground/earth) between the ACTUATOR-LP FUEL VALVE, ENG 1 free connector 9QG-B, pin E and the ground/earth point 4003VN(522STA450)
- aircraft wiring (motor 1/open supply) between the RELAY-ENG/MASTER 1 (11QG), terminal A2 and the ENG/APU FIRE PANEL (1WD) free connector 1WD-A, pin T
- aircraft wiring (motor 2/open supply) between the RELAY-ENG/MASTER 1 (11QG), terminal B2 and the ENG/APU FIRE PANEL (1WD) free connector 1WD-B, pin <A
- aircraft wiring (motor 1/open supply) between the ENG/APU FIRE PANEL (1WD) free connector 1WD-A, pin U and the C/B-FUEL/LP VALVE/MOT 1/ENG 1 (1QG), terminal 2
- aircraft wiring (motor 2/open supply) between the ENG/APU FIRE PANEL (1WD) free connector 1WD-B, pin <B and the C/B-FUEL/LP VALVE/MOT 2/ENG 1 (3QG), terminal 2
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞28-24-00∞∞∞∞∞∞∞∞∞∞Page 201
Feb 01/98 CES
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific multimeter
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R AMM 28-24-41-000-001 Removal of the LP Fuel Valve 12QM(13QM)
R AMM 28-24-41-400-001 Installation of the LP Fuel Valve 12QM(13QM) AMM 28-24-51-000-001 Removal of the LP Fuel Valve Actuator AMM 28-24-51-400-001 Installation of the LP Fuel Valve Actuator ASM 26-21/02 ASM 28-24/01 ASM 76-12/01 AWM 28-24-01 AWM 94-05-02
3. Fault Confirmation
__________________
A. Procedure.
NOTE : You can get more data from the:
____
- Aircraft Maintenance Manual (AMM) Chapters 26-12-00, 26-21-00, 28-24-00, and 76-12-00 - Description and Operation (D and O)
- Trouble Shooting Manual (TSM), Task Supporting Data, (Ref. P. Block 301)
- Aircraft Schematic Manual (ASM) (Ref. ASM 26-21/02), (Ref. ASM 28-24/01), and (Ref. ASM 76-12/01).
(1) On the ENG/APU FIRE PANEL (1WD) located on the overhead panel 20VU, make sure that the ENG 1 FIRE PUSH pushbutton switch (P/BSW) is in the closed and guarded position.
(2) On the ECAM Control Panel 11VU, push (in) the FUEL P/BSW to get the FUEL system page on the ECAM lower display unit (DU).
(3) Set the ENG/MASTER 1 (3KC) switch (panel 115VU) to ON.
(4) Examine the ENG 1 LP fuel valve symbol on the FUEL system page.
(5) Examine the see/feel indicator on the ACTUATOR-LP FUEL VALVE, ENG 1 (9QG). (Ref. P. Block 301).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞28-24-00∞∞∞∞∞∞∞∞∞∞Page 202
Nov 01/00 CES
(6) If the FUEL page shows the ENG 1 LP fuel valve symbol as green, in line, and the see/feel indicator on the ENG 1 LP fuel valve shows that the valve is open:
- maintenance steps are not necessary.
4. Fault Isolation
_______________
A. If the FUEL page shows the ENG 1 LP fuel valve symbol as an amber cross line, and the see/feel indicator on the ENG 1 LP fuel valve shows that the valve is closed. (Ref. P. Block 301).
(1) Examine for obvious signs of damage the items that follow:
- the actuator supply cables and end connectors
- the actuator electrical recepticals
- the cable looms next to the actuators.
NOTE : Left Wing Wire Routing (Ref. AWM 94-05-02).
____
(2) Repair/replace all the unserviceable wiring and connectors.
(3) Do the test given in Para. 3.A.
(4) Disconnect the electrical supply cable connector 9QG-A from the ACTUATOR-LP FUEL VALVE, ENG 1 (9QG).
(5) With a multimeter do a test to see if the 28VDC supply is available at the connector 9QG-A between the pins as shown in the table below. 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 FUEL 燃油2(33)
