「一一一一一一一一一一一一一一一一一一一一一一一一T一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一T一一一一一一一一一一一一1 CFDS FAULT MESSAGES FAULT WARNINGS/MALFUNCTIONS 十一一一一一一一T一一一一一一一一一一一一一一一一一一一一一一一一T一一一一一一T一1 ISOLATION SOURCE MESSAGE ATA C PROCEDURE 十一一一一一一一一一一一一一一一一一一一一一一一一十一一一一一一一十一一一一一一一一一一一一一一一一一一一一一一一一十一一一一一一十一十一一一一一一一一一一一一1 R ECAM 2 SDAC2 : Y HYD TEMP XMTR 293311 3 315400 P 242 3381GR T 810 840 十一一一一一一一一一一一一一一一一一一一一一一一一十一一一一一一一十一一一一一一一一一一一一一一一一一一一一一一一一十一一一一一一十一十一一一一一一一一一一一一1 SFCC 2 WRONG INHIBIT SIGN FROM 292400 3 275100 P 291 CARGO DOOR YELLOW SYSTEM T 810 841 L一一一一一一一一一一一一一一一一一一一一一一一一1一一一一一一一1一一一一一一一一一一一一一一一一一一一一一一一一1一一一一一一1一1一一一一一一一一一一一一」
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL Page 104∞∞29-CFDS ∞∞∞∞∞∞∞∞∞∞
Aug 01/05 CES
MAIN HYDRAULIC POWER - FAULT ISOLATION PROCEDURES
_________________________________________________
TASK 29-10-00-810-801
Loss of the System Pressure of the Green and Yellow Hydraulic Systems
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-11-00-810-805 Loss of the System Pressure of the Green Hydraulic System 29-13-00-810-805 Loss of the System Pressure of the Yellow Hydraulic System AMM 71-00-00-710-003 Engine Automatic Start R AMM 71-00-00-710-028 Engine Shutdown
3. Fault Confirmation
__________________
A. Start the LH and RH engine (Ref. AMM TASK 71-00-00-710-003).
(1) Look for fault indications on the upper ECAM DU and the lower ECAM DU.
R (2) Shut down the engines (Ref. AMM TASK 71-00-00-710-028).
4. Fault Isolation
_______________
A. If the fault confirmation gives:
- the message HYD G+Y SYS LO PR on the upper ECAM DU. do the fault isolation procedure (Ref. TASK 29-11-00-810-805) and (Ref. TASK 29-13-00-810-805).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-10-00∞∞∞∞∞∞∞∞∞∞Page 201
Nov 01/99 CES
TASK 29-10-00-810-802
Loss of the System Pressure of the Green and Blue Hydraulic Systems
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
29-11-00-810-805 Loss of the System Pressure of the Green Hydraulic System 29-12-00-810-805 Loss of the System Pressure of the Blue Hydraulic System AMM 71-00-00-710-003 Engine Automatic Start R AMM 71-00-00-710-028 Engine Shutdown
3. Fault Confirmation
__________________
A. Start the LH engine (Ref. AMM TASK 71-00-00-710-003).
(1) Look for fault indications on the upper ECAM DU and the lower ECAM DU.
R (2) Shut down the LH engine (Ref. AMM TASK 71-00-00-710-028).
4. Fault Isolation
_______________
A. If the fault confirmation gives:
- the message HYD G+B SYS LO PR on the upper ECAM DU. do the fault isolation procedure (Ref. TASK 29-11-00-810-805) and (Ref. TASK 29-12-00-810-805).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-10-00∞∞∞∞∞∞∞∞∞∞Page 202
Nov 01/99 CES
TASK 29-10-00-810-803
Loss of the System Pressure of the Blue and Yellow Hydraulic Systems
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
中國(guó)航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 液壓(12)
