(1WW1,1WW2) AMM 31-53-34-400-001 Installation of the Flight Warning Computer (FWC) (1WW1,1WW2) ASM 27-85/01
3. Fault Confirmation
__________________
A. Do the operational test of the central warning systems (FWC) (Ref. AMM TASK 31-50-00-710-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message FWC1: LH SLT SYNC 4CNA:
- replace the FWC-1 (1WW1) (Ref. AMM TASK 31-53-34-000-001) and (Ref. AMM TASK 31-53-34-400-001).
(1) If the fault continues:
- replace the IPPU-SLAT (4CN) (Ref. AMM TASK 27-85-11-000-001) and (Ref. AMM TASK 27-85-11-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FWC1 (1WW1) to the slat IPPU (4CN), between pins AA/13G, 13H, 13J and pins A/C, D, E (Ref. ASM 27-85/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-53-00∞∞∞∞∞∞∞∞∞∞Page 298
Feb 01/05R CES
Loss of the RH SLT SYNC Signal Output of the Slat IPPU to the FWC 1
1. Possible Causes
_______________
- FWC-1 (1WW1)
- IPPU-SLAT (4CN)
- wiring from the FWC1 (1WW1) to the slat IPPU (4CN)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 27-85-11-000-001 Removal of the Instrumentation Position Pick-Off Unit AMM 27-85-11-400-001 Installation of the Instrumentation Position Pick-Off
Unit
AMM 31-50-00-710-001 Ground Scanning of the Central Warning System
AMM 31-53-34-000-001 Removal of the Flight Warning Computer (FWC)
(1WW1,1WW2) AMM 31-53-34-400-001 Installation of the Flight Warning Computer (FWC) (1WW1,1WW2) ASM 27-85/01
3. Fault Confirmation
__________________
A. Do the operational test of the central warning systems (FWC) (Ref. AMM TASK 31-50-00-710-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message FWC1: RH SLT SYNC 4CNB:
- replace the FWC-1 (1WW1) (Ref. AMM TASK 31-53-34-000-001) and (Ref. AMM TASK 31-53-34-400-001).
(1) If the fault continues:
- replace the IPPU-SLAT (4CN) (Ref. AMM TASK 27-85-11-000-001) and (Ref. AMM TASK 27-85-11-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FWC1 (1WW1) to the slat IPPU (4CN), between pins AD/13A, 13B, 13C and pins B/C, D, E (Ref. ASM 27-85/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-53-00∞∞∞∞∞∞∞∞∞∞Page 299
Feb 01/05R CES
Loss of the LH FLP SYNC Signal Output by the FWC 1
1. Possible Causes
_______________
- FWC-1 (1WW1)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-50-00-710-001 Ground Scanning of the Central Warning System AMM 31-53-34-000-001 Removal of the Flight Warning Computer (FWC) (1WW1,1WW2) AMM 31-53-34-400-001 Installation of the Flight Warning Computer (FWC) (1WW1,1WW2) ASM 27-55/01
3. Fault Confirmation
__________________
A. Do the operational test of the central warning systems (FWC) (Ref. AMM TASK 31-50-00-710-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message FWC1: LH FLP SYNC 3CNA:
- replace the FWC-1 (1WW1) (Ref. AMM TASK 31-53-34-000-001) and (Ref. AMM TASK 31-53-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring from FWC1 (1WW1) pins AA/13B, 13C, 13D to the first terminal block (Ref. ASM 27-55/01).
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-53-00∞∞∞∞∞∞∞∞∞∞Page A200
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 1(147)
