- get the FMS page on the MCDU MENU and then push the line key adjacent to the PRINT indication.
4. Fault Isolation
_______________
A. If it is not possible to print the FMGC1 data on the printer (4TW):
- replace the PRINTER (4TW) (Ref. AMM TASK 31-35-22-000-001) and (Ref. AMM TASK 31-35-22-400-001).
(1) If the fault continues:
- replace the FMGC-1 (1CA1) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If the fault continues:
- do a check of the wiring from FMGC1 (1CA1) pins AB/12F, 12G to printer (4TW) pins A/V, W (Ref. ASM 31-35/01).
1 If there is no continuity:
_ - repair the wiring.
2 If there is continuity:
_
- do a check of the wiring from MCDU2 (3CA2) pins A/27, 28 to FMCG1 (1CA1) pins AA/9F, 9G (Ref. ASM 22-86/04).
a If there is no continuity:
_ - repair the wiring.
b If there is continuity:
_
- replace the MCDU-2 (3CA2) (Ref. AMM TASK 22-82-12-000-001) and (Ref. AMM TASK 22-82-12-400-002).
B. Do the action given in Para. 3.B.
Printing of the FMGC2 Data not possible from the MCDU2
1. Possible Causes
_______________
- PRINTER (4TW)
- FMGC-2 (1CA2)
- MCDU-2 (3CA2)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 22-82-12-000-001 Removal of the MCDU (3CA1,3CA2,3CA3)
AMM 22-82-12-400-002 Installation of the MCDU (3CA1,3CA2,3CA3)
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 31-35-22-000-001 Removal of the Printer (4TW)
AMM 31-35-22-400-001 Installation of the Printer (4TW)
ASM 22-86/04
ASM 31-35/01
3. Fault Confirmation
__________________
A. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU PTR/SPLY 6TW J21 121VU CFDS/CFDIU/SPLY 2TW J18
R 121VU AUTO FLT/FMGC/2 10CA2 M17 121VU AUTO FLT/MCDU/2 11CA2 N20
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-35-00∞∞∞∞∞∞∞∞∞∞Page 228
Feb 01/05 CES
R **ON A/C ALL
B. Test
On the MCDU2:
- get the FMS page on the MCDU MENU and then push the line key adjacent to the PRINT indication.
4. Fault Isolation
_______________
A. If it is not possible to print the FMGC2 data on the printer (4TW):
- replace the PRINTER (4TW) (Ref. AMM TASK 31-35-22-000-001) and (Ref. AMM TASK 31-35-22-400-001).
(1) If the fault continues:
- replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If the fault continues:
- do a check of the wiring from FMGC2 (1CA2) pins AB/12F, 12G to printer (4TW) pins A/A, B (Ref. ASM 31-35/01).
1 If there is no continuity:
_ - repair the wiring.
2 If there is continuity:
_
- do a check of the wiring from MCDU2 (3CA2) pins A/27, 28 to FMGC2 (1CA2) pins AB/8F, 8G (Ref. ASM 22-86/04).
a If there is no continuity:
_ - repair the wiring.
b If there is continuity:
_
- replace the MCDU-2 (3CA2) (Ref. AMM TASK 22-82-12-000-001) and (Ref. AMM TASK 22-82-12-400-002).
B. Do the action given in Para. 3.B.
Printing of the CFDIU Data not possible from the MCDU2
1. Possible Causes
_______________
- PRINTER (4TW)
- CFDIU (1TW)
- MCDU-2 (3CA2)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 22-82-12-000-001 Removal of the MCDU (3CA1,3CA2,3CA3)
AMM 22-82-12-400-002 Installation of the MCDU (3CA1,3CA2,3CA3)
中國(guó)航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 指示和記錄系統(tǒng) 1(75)
