EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-22-02
ALL ú ú 04 Page 310 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 863-009
(2)
Remove the DO-NOT-OPERATE tag from the APU control switch on the P5 overhead panel.
S 413-007
(3)
Close the left APU access door, 317AL, and right APU access door, 318AR:
(a)
Remove the two quick-release pins, disconnect the two hold-open rods and put the two hold-open rods in the two clips on the right access door.
(b)
Install the two quick-release pins in the two brackets on the right APU compartment bulkhead.
(c)
Lift the right access door until you can install the lanyard on the pin at the aft APU compartment bulkhead.
NOTE: The lanyard will hold the right access door on the APU
____
compartment bulkhead.
(d)
Remove the two quick-release pins, disconnect the two hold-open rods and put the two hold-open rods in the two clips on the left access door.
(e)
Install the two quick-release pins in the two brackets on the left APU compartment bulkhead.
(f)
Make sure the insulation covers are correctly attach to the APU compartment firewall.
(g)
Lift the left access door until the two APU access doors are approximately aligned.
(h)
Close the two APU access doors.
(i)
Close the six latches on the right access door.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-22-02
ALL ú ú 04 Page 311 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
ENGINE - SERVICING (OIL CHANGE)
_______________________________
1. General_______
A. This procedure contains the three tasks you must do to change the engine oil. These tasks drain the oil, flush the oil system, and fill the engine oil system.
B. It is only necessary to flush the oil system in these conditions:
(1)
A different type or brand name oil is to be used
(2)
The engine has oil system contamination.
C. You can get access to the oil system components and the drains when you open the thrust reverser halves.
TASK 12-22-03-603-027
2. Drain the Engine Oil (Fig. 301)____________________
A. Special Tools and Equipment
(1) PWA 86018 - Adapter, Oil Sampler
B. Standard Tools and Equipment
(1) Container(s) - 10 U.S. gallon (40 liter) capacity, suitable for oil (3 are necessary)
C. Consumable Materials
(1) D00405 Lubricant - Antigalling HT-T-650 PWA 550-3
D. References
(1)
AMM 71-00-00/201, Power Plant
(2)
AMM 71-11-04/201, Fan Cowl Panel
(3)
AMM 71-11-06/201, Core Cowl Panel
(4)
AMM 72-34-03/401, Fan Exit Liner Segment
(5)
AMM 78-31-00/201, Thrust Reverser System
(6)
AMM 79-21-05/401, Main Oil Filter
(7)
AMM 79-21-10/401, Magnetic Chip Detector
(8)
IPC 72-62-01 Fig. 15
E. Access
(1)
Location Zone
412 Engine 1 - High Pressure Compressor
422 Engine 2 - High Pressure Compressor
432 Engine 3 - High Pressure Compressor
442 Engine 4 - High Pressure Compressor
(2)
Access Panel 415 and 416 Thrust Reverser Halves - Engine 1 425 and 426 Thrust Reverser Halves - Engine 2 435 and 436 Thrust Reverser Halves - Engine 3 445 and 446 Thrust Reverser Halves - Engine 4
F. Procedure
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機(jī)維護(hù)手冊 SERVICING 2(82)
