(2)  
D00068 Engine oil MIL-L-23699
 (optional to MIL-L-7808)

 B.  References
 (1)
54-62-00/201, Nacelle Strut Access Panels

 (2)
54-62-02/501, Nacelle Strut Access Doors

 C.  Access
 (1)  
Location Zone 454 System 1 - Strut Trailing Edge Fairing 484 System 4 - Strut Trailing Edge Fairing

 (2)  
Access Panel 454A Trailing Edge Fairing Doors - Nacelle Strut 1 484A Trailing Edge Fairing Doors - Nacelle Strut 4

 D.  Procedure
 S 613-017
 (1) Change the Oil
 (a)
Open the access doors on the engine nacelle strut.

 (b)
Remove the oil filler cap.

 (c)
Put a container under the oil drain plug.

 WARNING:_______DO NOT LET THE OIL STAY ON YOUR SKIN. YOU CAN ABSORB POISONOUS MATERIALS FROM THE OIL THROUGH YOUR SKIN.
 CAUTION: IMMEDIATELY CLEAN ALL OIL THAT FALLS ON ANY EQUIPMENT.
_______ OIL CAN CAUSE DAMAGE TO PAINT AND SOME RUBBER PARTS.
 (d) Do the steps which follow to drain the oil: 1) Remove the oil drain plug.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-09
 ALL  ú ú 01 Page 301 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 2) Discard the packing on the oil drain plug.
 3) Clean the oil drain plug.

 (e)  
Do the steps which follow to remove the oil filter for the turbine drive: 1) Remove the filter cap, the packing, and the spring. 2) Remove the oil filter from the turbine drive gearbox. 3) Discard the oil filter and the packing. 4) Clean the filter cap and the spring.

 (f)  
Do the steps which follow to install the oil filter for the turbine drive: 1) Install the new oil filter and the spring in the oil filter

 port. 2) Lubricate the packing and the threads on the filter cap
 with oil.
 3) Install the packing on the filter cap.
 4) Install the filter cap.
 5) Safety the filter cap with a lockwire.

 (g)  
Do these steps to install the drain plug: 1) Lubricate the packing and the threads on the oil drain plug

 with oil. 2) Install the packing on the oil drain plug. 3) Install the oil drain plug in the turbine drive gearbox. 4) Safety the drain plug with a lockwire.

 (h)  
Add oil until the oil overflows the opening of the scupper.

 (i)  
Install the oil filler cap.

 (j)  
Do a leakage check of the oil filler cap, the filter cap, and the oil drain plug.

 (k)  
If you find leakage, repair the cause of it.

 (l)  
Close the access doors on the engine nacelle strut.

 CAUTION:_______ DO NOT MIX OILS OF DIFFERENT BRAND NAMES.  SOME OILS WILL
 CHEMICALLY CHANGE WHEN YOU MIX THEM.  THIS CAN CAUSE
 DAMAGE TO THE EQUIPMENT.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-09
 ALL  ú ú 01 Page 302 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
OIL FILLER CAPSEE A
INDICATOR ORANGE PAINTED
WINDOW INDICATOR SHAFT
PACKING
FLOAT
A-A
FILTER CAP
PACKING
BA
SPRING
OIL FILTER
BA
TURBINE DRIVE OIL DRAIN
GEARBOX PLUG

TO RELIEF
VALVE
VIEW IN THE FORWARD DIRECTION B-B
A
Air-Driven Pump Turbine (Oil Change)
Figure 301

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-09
 ALL  ú ú 01 Page 303 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 FILTER IDENTIFICATION - DESCRIPTION AND OPERATION
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 SERVICING 2(90)