(d)  
Tighten the nuts with your fingers.

 S 024-028
 (6)  
Remove the relay:

 (a)  
Remove the four screws that attach the relay to the P180 panel.

 (b)  
Remove the relay from the panel.

 TASK 24-31-03-404-009
 3. Main Battery and Battery Transfer Relay Installation (Fig. 401)
____________________________________________________
 A. References
 (1)  
24-22-00/201, Manual Control

 (2)  
AMM 45-10-00/201, Central Maintenance Computer System

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 24-31-03
 ALL  ú ú 03 Page 403 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (3)  
IPC 24-33-07 Fig. 1

 (4)  
WDM 24-33-11, 24-33-12

 (5)  
SSM 24-33-01

 B. Access
 (1)  
Location Zone
 116 Area Between Nose Gear Well and Fuselage, RH
 271 Passenger Cabin, LH

 (2)  
Access Panel
 P180 DC Power Distribution Panel

 C. Install the Main Battery Relay or the Battery Transfer Relay
 S 424-029
 (1)  
Install the relay:

 (a)  
Put the relay in its position on the P180 panel.

 (b)  
Install the four screws that attach the relay to the panel.

 (c)  
Tighten the nuts.

 S 434-030
 (2)  
Connect the electrical leads to the relay:

 (a)  
Remove the nuts and washers from the studs on the relay.

 CAUTION: MAKE SURE YOU CONNECT THE CORRECT ELECTRICAL LEAD TO EACH
_______ STUD ON THE RELAY. AN INCORRECT INSTALLATION CAN CAUSE A MALFUNCTION OF THE CIRCUIT AND DAMAGE TO THE EQUIPMENT.
 (b)  Connect each electrical lead to its applicable stud on the relay.
 CAUTION: DO NOT INSTALL THE WASHERS BELOW THE ELECTRICAL LEADS.
_______ THIS WILL CAUSE HEAT THAT CAN BURN THE STUDS ON THE RELAY.
 (c)  
Put a washer and a nut on each stud.

 (d)  
Tighten the nuts.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 24-31-03
 ALL  ú ú 03 Page 404 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 414-015
 (3)  
Close the access doors for the P180 panel.

 S 434-031

 (4)  
Connect the electrical connectors to the batteries:

 (a)  
Put the main battery connector (DM7423A) into the receptacle on the main battery.

 (b)  
Put the APU battery connector (DM7432A) into the receptacle on the APU battery.

 (c)  
Turn the knobs on the connectors clockwise with your hand until they are tight.

 S 864-032
 (5)  
Remove the DO-NOT-OPERATE tag from the BATTERY switch.

 D.
Do a Test of the Main Battery Relay or the Battery Transfer Relay

 S 864-033
 (1)  
Supply electrical power (Ref 24-22-00/201).

 S 714-034

 (2)  
Do a test of the relay:

 (a)  
Make sure the STANDBY POWER switch, on the P5 panel, is set to AUTO.

 (b)  
Open the 6A25 XFR RELAY STBY circuit breaker on the P6 (main power distribution) panel and attach a DO-NOT-CLOSE tag.

 (c)  
Make sure the main EICAS display operates correctly.

 (d)  
Remove the DO-NOT-CLOSE tag and close the 6A25 XFR RELAY STBY circuit breaker on the P6 panel.

 (e)  
Set the STANDBY POWER switch to BAT.

 (f)  
Make sure the main EICAS display operates correctly.

 (g)  
Set the STANDBY POWER switch to AUTO.

 (3)
Remove electrical power, if it not necessary (Ref 24-22-00/201).

 S 864-035
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 ELECTRICAL POWER 電源 2(60)