28-25-10
 ALL  ú ú 01 Page 404 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (3)  S 434-033Install lockwire on the bolts.
 (4)  S 434-012Put the coupling nut (10) over the end of the valve body (9).
 S 434-013

 CAUTION:_______YOU MUST NOT DISTORT THE SHAPE OF THE RETAINING RING. IF YOU DISTORT THE SHAPE OF THE RING YOU MAY CAUSE PERMANENT DAMAGE TO THE RING AND CAN CAUSE LEAKS AT THE COUPLING.
 (5)  
Put the retaining ring (11) over the end of the valve body (9) to keep the coupling nut (10) on the valve body.

 S 434-014

 (6)  
Install a new packing (5), lightly lubricated with petrolatum, over the end of the valve body (9).

 S 434-015
 CAUTION:_______YOU MUST NOT DISTORT THE SHAPE OF THE RETAINING RING. IF YOU DISTORT THE SHAPE OF THE RING YOU MAY CAUSE PERMANENT DAMAGE TO THE RING AND CAN CAUSE LEAKS AT THE COUPLING.
 (7)  
Put the second retaining ring (11) over the end of the valve body

 (9)
 to retain the packing (5) on the valve body.

 S 434-016
 (8)  
Tighten the coupling nut (10) on the inlet tee (12) with your hand until only three threads show on the tee.

 S 434-034

 (9)  
Install lockwire on the coupling nut.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-25-10
 ALL  ú ú 03 Page 405 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 434-017
 (10)
 Put the coupling (8) over the end of the valve body (9). S 434-018

 (11)
 Put the retaining ring (7) over the end of the valve body (9) to hold the coupling (8) on the valve body.

 S 434-019

 (12)
 Put the packings (5), lightly lubricated with petrolatum, over the end of the ferrule on the outlet tube (4) and the end of the valve body (9).

 S 434-020

 (13)
 Put the outlet tube (4) and the valve body (9) together with a gap of 0.10-0.20 inch between the ends.

 S 434-036

 (14)
 Put the retainer halves (6) in the gap so that the packings (5) are between the retaining rings (7) and the retainer halves (6).

 S 434-035

 (15)
 Snap the retainer halves together.

 S 434-021

 (16)
 Tighten the coupling nut on the outlet tube (4) until no threads show on the coupling (8).

 S 434-037

 (17)
 Install lockwire between the coupling nut to the coupling.

 CAUTION:_______ YOU MUST NOT DISTORT THE SHAPE OF THE RETAINING RING.  IF YOU
 DISTORT THE SHAPE OF THE RING YOU MAY CAUSE PERMANENT DAMAGE TO
 THE RING AND CAN CAUSE LEAKS AT THE COUPLING.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-25-10
 ALL  ú ú 03 Page 406 ú Feb 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 414-022
 (18)
 Go out of the No. 2 main tank (AMM 28-11-00/201).

 S 414-038

 (19)
 Install the access door 544AB.

 S 434-023

 (20)
 Install the APU fuel shutoff valve actuator (AMM 28-25-02/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-25-10
 ALL  ú ú 02 Page 407 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 1.

2.

3.

4.

5.

A
747-400 MAINTENANCE MANUAL
 DEFUELING - DESCRIPTION AND OPERATION
_____________________________________
General
_______
 A.  The fuel system is designed to permit complete or partial defueling of any or all tanks. To accomplish the defueling operation, portions of the pressure fueling, center wing tank scavenge, reserve tank transfer, engine fuel feed, and fuel jettison systems are used in combination.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 3(108)