78-34-00
ALL ú ú N03 Page 11 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
FORWARD THRUST LEVER
SEE A
MICROSWITCH PACK,
SWITCHES (S181,S182,
S183,S184) FOR THE
DIRECTIONAL CONTROL
VALVE
THRUST LEVER
ASSEMBLY
INTERLOCK AUTOTHROTTLE
ACTUATOR SERVOMOTOR AND
FOR THE BRAKE MECHANISM FORWARD
REVERSE ASSEMBLY THRUST
THRUST LEVER
INTERLOCK
MECHANISM
FOR THE REVERSEREVERSE THRUSTTHRUST LEVER
ANGLE TRANSDUCERS FOR
THE THRUST LEVER
CONTROL SWITCH FOR THE THRUST
A1
REVERSER
THRUST LEVER 41
BRAKE AND RESOLVERS ARE SHOWN
(LEVERS 1, 2, AND 3 EQUIVALENT)
IN THE FULL REVERSE THRUST POSITION.
FORWARD THRUST LEVER IS SHOWN
IN THE HALF FORWARD POSITION.
B1
Thrust Reverser Control Switch and Directional Valve Control Switch
Figure 3
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-34-00
ALL ú ú N03 Page 12 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
D. Details of proximity sensor removal/installation and fault isolation can be found in Thrust Reverser Indication System (Ref 78-36-00/001).
8. Operation
_________
A. Functional Description
(1) Stowed Position of the Thrust Reverser (Fig. 5)
(a) When the forward thrust lever is at the idle position, the reverse thrust lever is in the stow position, and the thrust reverser is stowed, the interlock actuator for the thrust lever is in the retracted position. With the interlock actuator retracted, the forward thrust lever can be advanced but movements of the reverse thrust lever are restricted to the reverse idle range only.
CENTER LOCKING HYDRAULIC ACTUATOR
Figure 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-34-00
ALL ú ú N03 Page 13 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-34-00
ALL ú ú N02 Page 14 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
M7838 PROX SW (PSEU)E1-3 SHELF, E1 EQUIP RACK
NOTE: ENG 2, 3, AND 4 SIMILAR
REF DWG: 78-34-01
Thrust Reverser Control - Eng 1Figure 5
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
(b)
The hydraulic actuators are in the retracted position. The center locking hydraulic actuators are locked.
(c)
The proximity sensor for the actuator lock on the center locking hydraulic actuators are in the target near condition. The deploy proximity sensor on each center actuator are target far condition. The proximity sensor for the auto restow on each reverser half are in target near condition.
(d)
The blocker doors for the thrust reverser are in the stowed position providing a smooth passage for fan air exhaust to produce thrust.
(2) Thrust Reverser Deployment
(a) The forward thrust levers must be in idle position before moving the reverse thrust levers. The reverse thrust levers are pulled up and back from stowed position to idle detent position. 1) An internal mechanical interlock for the forward/reverse
thrust lever prevents movement of the reverse thrust lever unless the forward thrust levers are in idle. This mechanical interlock is different from the interlock actuator operation.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 2(59)
