(2)
Circuit Breaker Lockout Clip
(Commercially Available)
(3)
LE Slat Drive Lock Set - B27020-31
(includes CB Locks B27020-25 and B27065-1. Valve Locks B27020-32 or B27077-1 are not used in this procedure)
B. Consumable Materials
(1)
D00014 Grease - MIL-G-21164 (Recommended)
(2)
D00013 Grease - MIL-G-23827 (Optional)
(3)
D00033 Grease - BMS 3-33 (recommended)
(4)
D00015 Grease - BMS 3-24 (optional)
C. References
(1)
06-44-00/201, Wing Access Doors and Panels
(2)
24-22-00/201, Electrical Power - Control
(3)
AMM 27-81-00/201, LE Slat System - Maintenance Practices
(4)
29-11-00/201, Main (Left, Right, and Center) Hydraulic Systems
(5)
32-00-15/201, Landing Gear Door Locks
(6)
32-00-20/201, Landing Gear Downlocks
(7)
78-31-00/201, Thrust Reverser System
D. Access
(1) Location Zones 193/194 Wing to Body - Forward Lower Half 211/212 Control Cabin 510/610 Wing Leading Edge - Forward of Front Spar and Inboard
of Nacelle Strut 520/620 Wing Leading Edge - Forward of Front Spar and
Outboard of Nacelle Strut 730/740 Left and Right Main Landing Gears and Doors 732/742 Left and Right Main Landing Gear Wheel Well
(2) Access Panels 511DB/611DB Main and Auxiliary Track Roller Lubrication 511FB/611FB Main and Auxiliary Track Roller Lubrication 511HB/611HB Main and Auxiliary Track Roller Lubrication
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 01 Page 310 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
E. Prepare for the Lubrication
S 843-050
WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE THRUST REVERSER. ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURY TO YOU OR DAMAGE TO EQUIPMENT.
(1)
Do this procedure: Thrust Reverser Deactivation for Ground
Maintenance (Ref 78-31-00/201).
S 843-051
(2)
Make sure the trailing edge (TE) flaps and LE slats are fully extended (AMM 27-81-00/201).
S 843-052
(3)
Make sure the flap control lever is in the 30-unit detent.
S 933-053
(4)
Install a DO-NOT-OPERATE tag on the flap control lever.
S 843-054
(5)
Make sure the landing gear downlocks for the nose and main landing gear are installed (Ref 32-00-20/201).
S 843-055
WARNING:_______USE AMM 32-00-15/201 TO INSTALL THE DOOR LOCKS. THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(6)
Open the doors for the main landing gear and install the door locks (Ref 32-00-15/201).
S 863-056
(7)
Remove the pressure from the left hydraulic system
(Ref 29-11-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 01 Page 311 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 843-057
(8) Install a PDU lock in the TE flap PDU at the forward bulkhead of the left main gear wheel well (Fig. 307).
S 863-058
(9) Open these circuit breakers on the overhead panel, P11, and attach DO-NOT-CLOSE tags: (a) 11B18, WARN ELEX B (b) 11D31, HYDRAULICS PTU CONT (c) 11J33, WARN ELEX A
S 863-059
(10) Open this circuit breaker on the P11 panel and install circuit breaker lock (B27065-1): 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：757 AMM 飛機維護手冊 SERVICING 2(2)
