................................................................................ | | | CLEANING | | CLEANER | WATER | SOLVENT | ................................................................................ | ANY CLEANER IN | | | | TABLE 301 | 2 | 5 TO 6 | 2.............................…....................…...........................1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-25-01
ALL ú ú 01 Page 303 ú Mar 20/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
~.............................................................................. | Heavy Duty Cleaners | | Table 303 | ................................................................................ | | DILUTION RATIO: NUMBER OF VOLUMES | | | OF WATER OR CLEANING SOLVENT TO | | | ONE VOLUME OF CLEANER | ................................................................................ | | | CLEANING | | CLEANER | WATER | SOLVENT | ................................................................................ | B00022 AIRSHOW W | 5 TO 15 | | 2.............................…....................…...........................1
D. References
(1)
AMM 20-41-00/201, Static Grounding
(2)
AMM 32-00-15/201, Landing Gear Door Ground Operations and Locking Procedure
E. Prepare to Clean the Airplane
NOTE: Be careful when you clean the airplane in very hot weather.
____ The heated surface of the airplane can dry the cleaners before you can flush them with water. The dried cleaners can stain the surface.
S 503-002
WARNING: KEEP ALL OF THE EQUIPMENT THAT YOU USE WITH FLAMMABLE SOLVENTS
_______ AWAY FROM SOURCES OF HEAT. IF THERE IS WIND, MAKE SURE THE SOLVENTS DO NOT FALL ON ELECTRICAL EQUIPMENT OR WARM COMPONENTS.
(1)
Move all of the equipment that you will use with flammable solvents away from sources of heat.
(2)
Statically ground the airplane (AMM 20-41-00/201).
S 843-004
(3)
Close all of the passenger doors, cargo doors, emergency exits, and access doors and panels.
S 863-003
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-25-01
ALL ú ú 01 Page 304 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 843-039
WARNING:_______ WHEN THE PITOT PROBES ARE COVERED, MAKE SURE THAT CONDITION IS
VISIBLE FROM THE GROUND. IN ADDITION, ATTACH A TAG TO THE LEFT
CONTROL WHEEL IN THE FLIGHT DECK AS A REMINDER THAT PITOT
PROBES ARE COVERED. FAILURE TO OBSERVE AND REMOVE COVERINGS
OVER PITOT PROBES BEFORE FLIGHT MAY CAUSE LARGE ERRORS IN
AIRSPEED-SENSING AND ALTITUDE-SENSING SIGNALS, WHICH MAY LEAD
TO LOSS OF SAFE FLIGHT.
CAUTION: USE COVERS, BLACK POLYETHYLENE SHEET, AND YELLOW VINYL ADHESIVE
_______ TAPE TO KEEP LIQUIDS OUT OF AREAS THAT CONTAIN MECHANICAL, ELECTRICAL, OR HYDRAULIC COMPONENTS. LIQUIDS WHICH ENTER THESE AREAS CAN CAUSE CORROSION, FREEZE DURING AIRPLANE FLIGHT, OR REMOVE NECESSARY LUBRICANTS.
CAUTION: WHENEVER AN OPENING IS COVERED, MAKE SURE THAT CONDITION IS
_______ VISIBLE FROM THE GROUND. ENGINES SHOULD NOT BE OPERATED WITH COVERS IN PLACE BECAUSE THE COVERS CAN COME OFF AND DAMAGE THE ENGINES.
CAUTION: MAKE SURE THE PITOT PROBE COVERS ARE IN GOOD WORKING CONDITION
_______ WITH NO EVIDENCE OF DAMAGE, ESPECIALLY FRAYING AROUND THE COVER OPENING. FRAYED FIBERS FROM THE COVER COMBINED WITH OTHER SUBSTANCES SUCH AS DIRT, GREASE AND FLUIDS CAN CAUSE OBSTRUCTION IN THE PROBE.
(4) Put the covers on these components:
(a) Pitot probes (See Fig. 301 for locations of pitot probes)
(b) Engine inlet, fan exhaust, and turbine exhaust
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 SERVICING 2(68)
