曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BK.  PC (PRODUCTION CERTIFICATE) - A certificate issued by the FAA authorizing the production of a type certificated or supplemental type certificated product.
BL.  PMA (PARTS MANUFACTURER AUTHORITY) - An approval issued by the FAA to produce a modification or replacement part for sale for installation on a type certificated product (Ref. FAR Part 21, Subpart K). All parts produced under a PMA shall be marked in accordance with FAR 45.15. Manufacturers outside the U. S. are not generally issued PMAs, per FAR 21.303 (G).
BM.  PAH (PRODUCTION APPROVAL HOLDER) - The holder of a Type Certificate (TC), Production Certificate (PC), Parts Manufacturer Approval (PMA), or Technical Standard Order Authorization (TSOA) with respect to a particular product or part thereof.
BN.  PRODUCTION OVERRUNS - Parts that a manufacturer produces in addition to what was authorized by the production approval holder.
BO.  PROTOTYPE - A product suitable for functional evaluation of mechanical and electrical design and performance.
BP.  QUALITY SYSTEM - The distributors total network of administrative and technical data and detailed procedures, which is implemented to assure that the parts sold by the distributor conform to the stated design and are properly documented and stored.
BQ.  QUALITY SYSTEM STANDARDS - Guidelines developed by organizations such as the Airlines Suppliers Association, that provide means to ensure that the parts conform, and are properly documented and stored.
BR.  QUARANTINE - A segregated holding area for items that do not meet AMES Material Services, Inc. quality requirements.
BS.  REBUILT - An airframe, aircraft engine, propeller, appliance, or component part which has been disassembled, cleaned, inspected, repaired as necessary, reassembled and tested to the same tolerances and limits as a new item, in conformity with approved data. Using either new or used parts that conform to new part tolerances and limits or to approved oversized or undersized dimensions. Rebuilt can only be accomplished by an authorized manufacturer (FAR 43.2(b)).

BT.  RECOVERABLES - Items which may be repaired to a serviceable condition one or more times before scrapping. Repair is by rework, maintenance, preventative maintenance, rebuilding or alteration, such as welding, refinishing, recharging, etc.
BU.  REJECTED - An item that does not meet AMES Material Services, Inc. quality requirements and cannot be reconciled to meet the acceptable criteria.
BV.  REPAIRED - An airframe, aircraft engine, propeller, assembly, appliance, accessory, component or part, which has been restored to a serviceable condition in conformity with data acceptable to the FAA.
BW.  REPAIRABLE PARTS - An item that is economically repairable and can be rehabilitated to a serviceable condition. Normally these items are assemblies but also include units without component parts that can be reworked by maintenance, preventative maintenance, rebuilding and alteration, cleaning, refinishing, patching, etc.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AMES MATERIAL SERVICES, INC.PROCEDURES MANUAL(13)