曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BX.  REVERSE ENGINEERING - The process of disassembling, evaluating, and redesigning a part for the purpose of duplicating a product with similar characteristics.
BY.  ROTABLE PARTS - An item that can be economically restored to a serviceable condition and, in the normal course of operations, can be repeatedly rehabilitated to fully serviceable condition over a period approximately the life of the flight equipment to which it is related.
BZ.  SCRAP - An item that cannot be restored to a serviceable condition.
CA.  SELF-AUDIT/EVALUATION - A continuous program that the distributor applies to evaluate their compliance with its quality system.
CB.  SINGLE SOURCING - A method whereby a part is procured from only one supplier.
CC.  SMT - (Surplus Material Transfer) Used by AMES, Inc. and AMES Material Services, Inc. departments to transfer aircraft and non-aircraft items to AMES Material Services, Inc.
CD.  SOLE SOURCE SUPPLIER - The only supplier capable of meeting the requirements for an item.

CE.  SPECIFICATION - A clear, complete, and accurate statement of the engineering and technical requirements for a material, an item, or a service, and the procedure to be followed to determine if the requirements are met.
CF.  STC (SUPPLEMENTAL TYPE CERTIFICATE) - A certificate issued by the FAA that authorizes the alteration of a product by introducing a major change in type design, not great enough to require a new application for a type certificate (Ref. FAR Part 21, Subpart E).
CG.  STANDARD PART - A part manufactured in conformance with a specification established, published and maintained by a consensus standards organization, a government agency, or a holder of a type certificate (TC). The specification includes design, manufacturing, test and acceptance criteria and identification requirements.
CH.  SUBASSEMBLY - Two or more parts that form a portion of an assembly or component replaceable as a whole, but having a part or parts which are individually replaceable.
CI.  SUPPLIER - An organization that sells aeronautical products for use by the air transport industry. The products may include spare parts, information and electronic data processing requirements.
CJ.  SURPLUS - Indicates a specified quantity of an item that is over and above that required to meet forecast stock requirements in support of normal operations.
CK.  SURPLUS DEALER - A seller of parts which are available on the market that are not sold directly from a manufacturer or a distributor or any other approved source.
CL.  TC (TYPE CERTIFICATE) - A certificate issued by the FAA that approves a design for an aircraft, aircraft engine, or propeller.
CM.  TIME CONTROL - See Overhaul, Time Controlled.
CN.  TRACEABILITY - The ability via documentation to track aircraft parts, processes, and materials by lot, serial number or other means to the certificated source or manufacturer.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AMES MATERIAL SERVICES, INC.PROCEDURES MANUAL(14)