曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 |27725)  |Reducer  | 020-037  |approx|  | 020-037  | 0-4  |
 |  |  |  |  4  |  |  |  |
 |  |  |  |  |  |  |  |
 |  |Base  | 823-730  |  4  | 31-40  | 823-730  |  4  |
 |  |Activator| 910-702  |  1  | seconds  | 910-702  |  1  |
 |  |Reducer  | 020-707  |approx|  | 020-707  | 0-4  |
 |  |  |  |  4  |  |  |  |
 |  |  |  |  |  |  |  |
 |Products  |--- | Part A  |  1  | 31-40  | Part A  |  1  |
 |Research  |--- | Part B  |  2  | seconds  | Part B  |  2  |
 |(MIL-C-27725)|  |  |  |  |  |  |

 2.............….........…..............…......….............…............…......1
 (d)  
Mix the base and the catalyst.

 (e)  
Add a reducer if it is necessary.

 S 627-057
 (2)  Do not use the corrosion resistant finish until a minimum of 1 hour after you mix it.
 NOTE: The maximum usable life of the corrosion resistant finish is
____ 8 hours at 75° |5°F (23.9° |2.8°C).
 (a)  Immediately after you mix the corrosion resistant finish, write the date, the time you mixed the finish, and the usable life expiration on the containers. 1) Keep the containers with the corrosion resistant finish
 tightly closed until you use it or the finish will become thicker.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-11-00
 ú  ALL  ú
 ú ú  ú 01.101 ú  Page 723Sep 28/02 

A

757
MAINTENANCE MANUAL

 S 627-058
 (3)  
To apply the corrosion resistant finish, use the brush procedure or spray gun procedure as follows:

 (a)  
For the brush procedure (applicable for small areas),
 do the steps that follow:
 1) Apply a thin layer of corrosion resistant finish

 

 (approximately 0.0005 inch) with a soft bristle paint brush.
 NOTE: Move the brush in one direction as much as possible.
____
 a)  To prevent air bubbles, spaces and removal of finish already applied, do not move the brush quickly or too many times when you apply the corrosion resistant finish.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 燃油 CHAPTER 28 - FUEL 1(108)