曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 EICAS MAINT panel, on the right side panel, P61.
 (i)  Push and hold the ERASE switch, on the EICAS MAINT panel, for
 approximately three seconds.
 (j)  Make sure the EICAS message, RSV BRAKE VAL, does not show on
 the EICAS display.
 (k)  Manually move the pressure shutoff valve for the isolated ACMP,
 in the right wheel well, to the OPEN position.
 (l)  Make sure the EICAS message, RSV BRAKE VAL, shows on the EICAS
 display.
 (m)  Remove the electrical connector from the pressure shutoff valve
 for the isolated ACMP.
 (n)  Push the ELEC/HYD, and then the AUTO EVENT READ switches on the
 EICAS MAINT panel, on the P61 panel.
 (o)  Push and hold the ERASE switch, on the EICAS MAINT panel, for
 approximately three seconds.
 (p)  Make sure the EICAS message, RSV BRAKE VAL, does not show on
 the EICAS display.
 (q)  Install the electrical connector on the supply shutoff valve
 for the isolated ACMP.
 (r)  Make sure the EICAS message, RSV BRAKE VAL, shows on the EICAS
 display.
 (s)  Put the RESERVE BRAKE switch, on the P1 panel, in the OFF
 position.
 (t)  Push the ELEC/HYD, and then the AUTO EVENT READ switches on the
 EICAS MAINT panel, on the P61 panel.
 (u)  Push and hold the ERASE switch, on the EICAS MAINT panel, for
 approximately three seconds.
 (v)  Make sure the EICAS message, RSV BRAKE VAL, does not show on
 the EICAS display.
 (w)  Manually move the supply shutoff valve for the isolated ACMP,
 in the right wheel well, to POSITION 1.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-11-00
 ALL  ú ú 04 Page 519 ú Jun 20/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

 (x)  
Make sure the EICAS message, RSV BRAKE VAL, shows on the EICAS display.

 (y)  
Manually move the supply shutoff valve for the isolated ACMP to POSITION 2.

 (z)  
Install the electrical connector on the pressure shutoff valve for the isolated ACMP. (aa) Push the ELEC/HYD, and then the AUTO EVENT READ switches on the EICAS MAINT panel, on the P61 panel. (ab) Push and hold the ERASE switch, on the EICAS MAINT panel, for approximately three seconds.

 (ac) Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel: 1) 11K22, RESERVE BRAKE SOURCE
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 液壓 CHAPTER 29 - HYDRAULIC POWER 1(76)