曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

It is up to the EGPWS customer to determine if a specific database update is applicable to their operation. Honeywell estimates that EGPWS customer will update their database approximately once every 2 years.
NOTE: Some database updates may require a hardware or software mod.  Any required modification information will be identified in the associated database Service Bulletin.

4.2.2 LOADING A DATABASE
A database is loaded into the EGPWC via the PCMCIA card slot in the front panel in the MK V and MK VII.  In the MK VI and MK VIII, a “Smart Cable” data-loader is connected to the Test connector on the front panel.  The database may be loaded either while the EGPWC is on the aircraft or on a bench provided the appropriate power is applied.
Each Honeywell database Service Bulletin includes the procedure for loading the database in the EGPWC.  Refer to the Service Bulletin for this information.

 

4.3 FLIGHT HISTORY DOWNLOADING
In flight, the EGPWC records detected faults, and data prior to and following an alert.  This flight history data can be downloaded from the EGPWC via the PCMCIA interface.  With this data, Honeywell can analyze the flight history when necessary to help in the troubleshooting process, or analyzing special or unique events.
4.3.1 OBTAINING AN EGPWS FLIGHT HISTORY DOWNLOAD CARD
To obtain a Flight History Download (PCMCIA) Card necessary for this procedure, write or FAX to:
Honeywell
P.O. Box 97001 Attn: EGPWS Dept., Administrative Assistant, Certification Group M/S L2J 15001 N.E. 36th Street Redmond, WA USA 98052 Phone 1-800-813-2099 FAX: (425) 885-2994
For MK V and MK VII EGPWS (P/N 965-0976-xx-xxx-xxx and 965-1076-xxx-xxx-xxx), request Flight History Download Card p/n 998-2809-401.
For MK VI and MK VIII EGPWS (P/N 965-11xx-xxx and 965-12xx-xxx), request Flight History Download Card p/n 998-2808-401.
NOTE:  A Honeywell programmed and formatted PCMCIA Card is required to initiate the download sequence and record the data.  The Download Cards (p/n 998-2809-401 and 998-2808-401) are not interchangeable.  Also, database update cards can not be used for flight history downloading.

4.3.2 DOWNLOAD PROCEDURE.
1.  
For the MK VI or MK VIII, access and connect Smart Cable p/n 951-0386-001 to Test Connector J3 on the EGPWC front panel.

For the MK V or MK VII, access and open the front panel door on the EGPWC.

2.  
Apply power to the EGPWC.

3.  
Verify that the COMPUTER OK LED is ON.

NOTE: If the COMPUTER FAIL LED is ON, the integrity of the Downloaded Data cannot be assured.
NOTE: If the EXTERNAL FAULT LED is ON, this will not interfere with the Download process.
4.  On the EGPWC front panel or Smart Cable (see Figures x-x and x-x), verify the:
.  
IN PROG LED is extinguished.

.  
CARD CHNG LED is extinguished.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：增強型近地警告系統 Enhanced Ground Proximity Warning 航線維護手冊 Systems Line Maintenance Manual(42)