(3)
A letter of TSO design approval is an FAA design approval for a foreign-manufactured article which has been found to meet a speci.c TSO in accor-dance with the procedures of Sec. 21.617.
(4)
An article manufactured under a TSO authorization, an FAA letter of accep-tance as described in Sec. 21.603(b), or an appliance manufactured under a letter of TSO design approval described in Sec. 21.617 is an approved article or appliance for the purpose of meeting the regulations of this chapter that require the article to be approved.
(5)
An article manufacturer is the person who controls the design and quality of the article produced (or to be produced, in the case of an application), including theparts of them and anyprocesses or services related to them that are procured from an outside source.
(c)
TheAdministratordoes notissue aTSO authorizationif the manufacturingfacilities for the product are located outside of the United States, unless the Administrator .nds that the location of the manufacturer’s facilities places no undue burden on the FAA in administering applicable airworthiness requirements.]
Amdt. 21-50, E.. 9/9/80
FAR21.603 :[TSO marking andprivileges.]
(a)
[Except as provided in paragraph (b) of this section and Sec. 21.617(c), no per-son may identify an article with a TSO marking unless that person holds a TSO authorization and the article meets applicable TSO performance standards.
(b)
The holder of an FAA letter of acceptance of a statement of conformance issued for an article before July 1, 1962, or any TSO authorization issued after July 1, 1962, may continue to manufacture that article without obtaining a new TSO authorizationbutshall comply with the requirementsofSecs.21.3,21.607 through 21.615, 21.619, and 21.621.
(c)
Notwithstandingparagraphs(a) and(b) ofthis section, afterAugust6,1976, no person may identify or mark an article with any of the following TSO numbers :
(1) TSO-C18, -C18a, -C18b, -C18c.
(2)
TSO-C24.
(3)
TSO-C33.
(4)
TSO-C61 or C61a.] Amdt. 21-50, E.. 9/9/80
FAR 21.605 : Application and issue.
(a)
[The manufacturer(or an authorizedagent) shall submit an applicationfor aTSO authorization, together with the following documents, to the Manager of the Air-craftCerti.cationO.cefor thegeographic areain which the applicantis located :]
(1)
A statement of conformance certifying that the applicant has met the requi-rements of this subpart and that the article concerned meets the applicable TSO that is e.ective on the date of application for that article.
(2)
One copy of the technical data required in the applicable TSO.
(3)
Adescription ofitsquality control systemin thedetail speci.edinSec.21.143. In complying with this section, the applicant may refer to current quality control data .led with the FAA as part of a previous TSO authorization application.
(b)
When a series of minor changes in accordance with Sec. 21.611 is anticipated, the applicant may set forth in its application the basic model number of the article and the part number of the components with open brackets after it to denote that su.x changeletters or numbers(or combinations of them) will be added from time to time.
(c)
After receiving the application and otherdocuments requiredbyparagraph(a) of this section to substantiate compliance with this part, and after a determination has been made of its ability to produce duplicate articles under this part, the Administratorissues aTSO authorization(including allTSOdeviationsgranted to the applicant) to the applicant to identify the article with the applicable TSO marking.
(d)
If the application is de.cient, the applicant must, when requested by the Adminis-trator, submit any additional information necessary to show compliance with this part. If the applicant fails to submit the additional information within 30 days after the Administrator’s request, the application is denied and the applicant is so noti.ed.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：FAA規章 美國聯邦航空規章 Federal Aviation Regulations 1(114)
