2. Assembly
NOTE: CAREFULLY INSPECT ALL RIVETED, SPOT WELDED, OR BONDED ASSEMBLIES AND COMPONENTS PRIOR TO INSTALLATION/ASSEMBLY. DO NOT REMOVE THESE ITEMS UNLESS REQUIRED DUE TO DAMAGE OR OTHER NEED FOR REPLACEMENT.
CAUTION: EXERCISE EXTREME CARE WHEN REMOVING SCREWS OR BOLTS THAT ATTACH A PART TO THE SYNTHETIC PANELING. THREADED INSERTS, WHICH ARE INSTALLED IN THE PANELING TO RECEIVE SCREWS OR BOLTS, ARE INSTALLED IN PANELING WITH POTTING COMPOUND. UNNECESSARY DAMAGE TO THESE INSERTS WILL REQUIRE REPLACEMENT.
NOTE: Assembly sequence is straight forward and self explanatory.
(a) Refer to IPL Figure 1 (Final Assembly) to assemble.
PAGE 7001
THIS PAGE INTENTIONALLY LEFT BLANK
FITS AND CLEARANCES
1. General
The torque values recommended are in accordance with the usual industry standard practices. (Refer to Table 8001)
TABLE 8001 TORQUE VALUES
TENSION TORQUE (IN-LBS) 15-17 30-35 65-90 130-180 220-360 270-610 630-950
THREAD SIZE 8-32 10-32 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20
PAGE 8001
THIS PAGE INTENTIONALLY LEFT BLANK
ILLUSTRATED PARTS LIST
1.
General
This section contains an illustrated parts list, definitions for the column headings of the
illustrated parts list, vendor codes / addresses, numerical index, assembly and detail
illustrations.
2.
Illustrated Parts List
The illustrated parts list consists of an itemized breakdown of parts used on the unit which are illustrated as necessary to provide for their identification. The column headings of the parts list are defined as follows:
A. "Fig. / Item" (Figure / Item) Column
The number listed under "Fig." is the figure number of the assembly illustration used to illustrate the listed parts. The numbers listed under "Item" are the item numbers identifying the parts used on the assembly and detail illustrations. Where a part is not illustrated, the item number of that part will be preceded with a dash (-). Where item number variants are listed in the "Fig. / Item" column, it will be preceded by a dash (-).
B. "Part Number" Column
The number listed under "Part Number" is the same as the manufacturer's drawing number for that part or the same as the number listed in the manufacturer's assembly drawing "List of Materials" or the same as the number listed in the manufacturer parts catalog.
中國(guó)航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST B757-200 LH RH CLASS DIVIDER(11)
