PAGE 1
THIS PAGE INTENTIONALLY LEFT BLANK
FIGURE 1
PAGE 3
25-20-31 JAN 11/2010
3. Safety Considerations
A. The LH RH Class Divider assembly incorporates safety design features such as rounded external corners, flush fittings, minimum projections and component retaining devices to prevent objects from dislodging when subjected to ultimate load conditions and accelera tions. All movable components of the galley, such as the door, incorporate a positive latching provision capable of retaining the component in the closed or stowed position during acceleration.
B. General warning placards, emergency placards, crew instructions placards, and weight placards are located in conspicuous places and are readable from normal working conditions.
C. Material used in construction of the unit is to be fire retardant.
4.
Maintainability
The unit is designed so that inspection, adjustment, service and removal/replacement of parts requires no special tools. Access is provided to the attachment fittings and various service facility connections at the airplane interface.
5.
Leading Particulars
Table 2 provides a list of leading particulars for the unit.
TABLE 2
LEADING PARTICULARS
Unit Part Number Height Width Depth Weight
LH Class Divider BM0901D01M1 -501 61.00 in (1549.4 mm) 54.56 in (1175.2 mm) 1.17 in (25.20 mm) 55.0 lbs24.95 (kg)
Unit Part Number Height Width Depth Weight
RH Class Divider BM0901D01M1 -502 61.00 in (1549.4 mm) 54.56 in (1175.2 mm) 1.17 in (25.20 mm) 55.0 lbs24.95 (kg)
CLASS DIVIDER ATTACHMENTS FIGURE 2
PAGE 5
25-20-31 JAN 11/2010
APPLICABLE INSERTS
FIGURE 3
THIS PAGE INTENTIONALLY LEFT BLANK
PAGE 7
TESTING AND FAULT ISOLATION
NOT APPLICABLE.
PAGE 1001
THIS PAGE INTENTIONALLY LEFT BLANK
AIRWORTHINESS LIMITATIONS
There are no Airworthiness Limitations required for these units.
The Airworthiness Limitations section is FAA-approved and specifies maintenance required under Part 43.16 and Part 91.403 of the Federal Aviation Regulations, unless an alternative program has been approved.
PAGE 1501
THIS PAGE INTENTIONALLY LEFT BLANK
WIRING DIAGRAM
NOT APPLICABLE.
PAGE 2001
THIS PAGE INTENTIONALLY LEFT BLANK
DISASSEMBLY
1. General
The unit is an integrally bonded structure which is fabricated from sandwich panels and
aluminum extrusions. The unit cannot be disassembled without affecting its structure
integrity. Disassembly instructions found herein are limited to removal of high-wear, easily
中國(guó)航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST B757-200 LH RH CLASS DIVIDER(5)
