曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

After you have setup the test correctly, push LSK 6L to continue
the test. If the setup is not correct, you get the INITIALIZATION
SETUP INCORRECT page. If the setup is correct, you get the
page that tells you the autotest is in progress.
INITIALIZATION SETUP INCORRECT Page
This page tells you that the initialization setup is not correct. To
return to the setup page, push LSK 6R. If you made the correct
changes, push the LSK 6L to continue.
Current Status Autotest
If the setup is correct, the autotests for all systems in group 10
starts. As the tests continue, the name of the system in test and
its library number shows on the CDU page. For example, if the
DME is now in autotest, you see *STATUS *10.05 on the second
line and *DME *-A/B on the third line of the CDU. These displays
change as different systems are in autotest. The page also
shows the percentage of the tests that are completed.
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - CURRENT STATUS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.212
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-117
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - CURRENT STATUS
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - CURRENT STATUS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.213
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-117
General
If all of the autotests pass, the next page that shows on the CDU
is the AUTOTEST PASSED page. You can then continue to the
next page to select a channel to test.
If one or more of the autotests fail, you get the AUTOTEST
FAILED page.
AUTOTEST FAILED Page
This page shows all of the systems that did not pass the
autotest. You can get more data about the failure when you
select the system. For the example, the operator selects the
ADIRU, LSK 2L. This shows the STATUS SUSPECT LRU(S) page
for the ADIRU autotest.
If you push LSK 6R, you go to the FAULT REVIEW page.
STATUS SUSPECT LRU(S) Page
This page shows the LRUs that could cause the failure of the
ADIRU autotest. It also shows the connector pins of the FCC that
were used to find this failure. You can use the NEXT PAGE and
PREV PAGE function keys on the CDU to look at all of the
suspect LRUs.
If you want to look at more detail about the failure, select LSK 6L
for test data.
Test Data Page
This page shows the test step where the failure was found and
the results of the test. For the example, in the graphic, the first
failure occurs in the 5th step (Q005) of the test. The expected
data should be a hex word 6000. FCC A failed since it shows a
hex word of 0000, but FCC B passes. There was also a failure in
step 7 (Q007). Again, FCC A failed and FCC B passed.
The Q before 005 and 007 means the failures occurred during
the autotest. Q stands for quick test which is what the autotest
used to be called.
You can use the NEXT PAGE and PREV PAGE function keys on
the CDU to look at all of the detail test data.
If you want to rerun the test, you push LSK 6L. If you push LSK
6R, PREV MENU prompt, you go to the AUTOTEST FAILED
page.
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - CURRENT STATUS AUTOTEST
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.214
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-118
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - CURRENT STATUS AUTOTEST
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - CURRENT STATUS AUTOTEST
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.215
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-118
AUTOTEST PASSES Page
If all of the autotests pass, you need to select the channel for the
test. You can choose one of these:
* Channel A
* Channel B
* Channel A and B.
For this example, channels A and B were selected.
SELECT ADDITIONAL TEST Page
After you select a channel, you need to choose one of these
tests:
* Autopilot
* Flight director
* Mach trim
* Speed trim
* Altitude alert.
For this example, the autopilot test was selected. You select
AUTOPILOT when you push LSK 2L.
INTERACTIVE TEST Page
This page gives YOU instructions as the test continues. After
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NGAMM1(76)