曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - BITE LIBRARY TESTS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.235
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-127
BITE LIBRARY TEST Page
To run select library tests, push LSK 3L. This shows the
LIBRARY TEST LIST page.
LIBRARY TEST LIST Page
This page lists some of the library tests. To see all of the library
tests, use the NEXT PAGE and PREV PAGE function keys on the
CDU.
To select a test, push LSK next to the LRU name. When you
push the LSK, a * shows just below the LRU prompt symbol.
This means that this library test runs when you start the tests.
You can select as many tests as you want.
To start the tests, push the EXECUTE prompt, LSK 6L. The next
page is the LIBRARY TEST AUTOTEST INITIALIZATION page
which is like all the other initialization pages.
BITE LIBRARY TEST Page
To skip some library tests, push LSK 4L. This shows the
LIBRARY TEST LIST page.
LIBRARY TEST LIST Page
This page lists some of the library tests. To see all of the library
tests, use the NEXT PAGE and PREV PAGE function keys on the
CDU.
There is an * below all of the LRU prompts. To skip a test, push
the LSK next to the LRU name. When you push the LSK, the *
just below the LRU prompt symbol goes out of view. This means
that this library test does not run when you start the tests. You
can skip as many tests as you want.
To start the tests, push the EXECUTE prompt, LSK 6L. The next
page is the LIBRARY TEST AUTOTEST INITIALIZATION page.
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - RUN/SKIP SELECT LIBRARY TESTS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.236
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-128
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - RUN/SKIP SELECT LIBRARY TESTS
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - RUN/SKIP SELECT LIBRARY TESTS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.237
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-128
General
The MCP tests lets you do several tests of the mode control
panel. In the tests you do a check of the function of the switches
and the displays. You also do a test of all of the mode selector
switches.
To do these tests, push LSK 3L on the EXTENDED
MAINTENANCE page. The next page is the SELECT
CHANNEL FOR TEST page. After you select the channel, you
will see the MCP TEST AUTOTEST INITIALIZATION page.
MCP TEST AUTOTEST INITIALIZATION Page
Like all the other initialization pages, this page gives
instructions to setup the autotests. The test sequence is the
same as when you select CURRENT STATUS and AUTOPILOT
tests. The pages look very similar except the title has MCP
COMPLETE TEST in it instead of CURRENT STATUS and
AUTOPILOT.
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - MCP TESTS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.238
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-129
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - MCP TESTS
DFCS - TRAINING INFORMATION POINT - DFCS BITE PAGES - MCP TESTS
EFFECTIVITY
SHZ ALL 22-11-00
Page 98.239
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
22-11-00-129
General
When you select the SENSOR VALUES prompt on the
EXTENDED MAINTENANCE page, you can then see one of
these signals on the SENSOR VALUES page:
* Analog signals
* Digital signals
* Option/program pins
* Discrete outputs
* Discrete inputs.
This lets you see the values for these signals without the need
for extra test equipment.
To select analog signals, push LSK 1L. This shows the ANALOG
SIGNALS LIST page.
ANALOG SIGNALS LIST Page
This pages lists some of the analog sensors that you can
measure. To see all of the analog sensors, push the NEXT
PAGE and PREV PAGE function keys on the CDU.
To select an analog sensor, push LSK next to the sensor name.
This shows the ANALOG SIGNAL page.
ANALOG SENSOR Page
This page lists these data:
* Analog sensor
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NGAMM1(81)