曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

DA20-C1 Flight Manual.
(5) Remove the engine cowlings. Refer to Chapter 71-10
(6) Examine the engine for oil leaks.
(7) Install the engine cowlings. Refer to Chapter 71-10
Oil Systems
DA20-C1 AMM
Page 206
29 Apr 2004 79-00-00 Doc # DA 201-C1
Rev. 9
5. Remove/Install The Oil Temperature Sensor
A. Remove The Oil Temperature Sensor
Detail Steps/Work Items Key Items
(1) Disconnect the airplane battery. Refer to Chapter 24-31.
(2) Remove the top engine cowling. Refer to Chapter 71-10
WARNING: DO NOT GET OIL ON YOU. OIL CAN CAUSE SKIN DISEASE.
(3) Remove the electrical connector from the oil
temperature sensor at the oil cooler adaptor.
(4) Remove the oil temperature sensor from the
oil cooler adaptor.
− Put a cap in the oil cooler adaptor hole.
B. Install The Oil Temperature Sensor
Detail Steps/Work Items Key Items
WARNING: DO NOT GET OIL ON YOU. OIL CAN CAUSE SKIN DISEASE.
(1) Remove the cap from the oil cooler adaptor.
(2) Install the oil temperature sensor.
− Tighten the oil temperature sensor.
(3) Connect the electrical connector to the oil
temperature sensor at the oil cooler adaptor.
(4) Install the top engine cowling. Refer to Chapter 71-10
(5) Do an engine run up test. Look specially for
correct oil temperature indications.
For the engine run procedure refer to the
DA20-C1 Flight Manual.
(6) Remove the top engine cowling. Refer to Chapter 71-10
(7) Examine the engine for oil leaks.
(8) Install the top engine cowling. Refer to Chapter 71-10
DA20-C1 AMM
Oil Systems
Doc # DA 201-C1
Rev. 9 79-00-00 Page 207
29 Apr 2004
6. Remove/Install The Oil Pressure Sensor
A. Remove The Oil Pressure Sensor
Detail Steps/Work Items Key Items
(1) Disconnect the airplane battery. Refer to Chapter 24-31.
(2) Remove the top engine cowling. Refer to Chapter 71-10
WARNING: DO NOT GET OIL ON YOU. OIL CAN CAUSE SKIN DISEASE.
(3) Remove the electrical connector from the oil
pressure sensor at the oil cooler/oil filter
adaptor.
(4) Remove the oil pressure sensor from the oil
cooler/oil filter adaptor.
− Put a cap in the oil cooler/oil filter
adaptor hole.
B. Install The Oil Pressure Sensor
Detail Steps/Work Items Key Items
WARNING: DO NOT GET OIL ON YOU. OIL CAN CAUSE SKIN DISEASE.
(1) Remove the cap from the oil cooler/oil filter
adaptor.
(2) Install the oil temperature sensor.
− Tighten the oil pressure sensor.
(3) Connect the electrical connector to the oil
pressure sensor at the oil cooler/oil filter
adaptor.
(4) Install the top engine cowling. Refer to Chapter 71-10
(5) Do an engine run up test. Look specially for
correct oil pressure indications.
For the engine run procedure refer to the
DA20-C1 Flight Manual.
(6) Remove the top engine cowling. Refer to Chapter 71-10
(7) Examine the engine for oil leaks.
(8) Install the top engine cowling. Refer to Chapter 71-10
Oil Systems
DA20-C1 AMM
Page 208
29 Apr 2004 79-00-00 Doc # DA 201-C1
Rev. 9
7. Remove/Install The Events Switch
A. Remove The Events Switch
Detail Steps/Work Items Key Items
(1) Disconnect the airplane battery. Refer to Chapter 24-31.
(2) Remove the top engine cowling. Refer to Chapter 71-10
WARNING: DO NOT GET OIL ON YOU. OIL CAN CAUSE SKIN DISEASE.
(3) Remove the electrical connector from the
events switch at the oil cooler/oil filter
adaptor.
(4) Remove the events switch from the oil
cooler/oil filter adaptor.
− Put a cap in the oil cooler/oil filter
adaptor hole.
B. Install The Events Switch
Detail Steps/Work Items Key Items
WARNING: DO NOT GET OIL ON YOU. OIL CAN CAUSE SKIN DISEASE.
(1) Remove the cap from the oil cooler/oil filter
adaptor.
(2) Install the oil temperature switch.
− Tighten the events switch.
(3) Connect the electrical connector to the
events switch at the oil cooler/oil filter
adaptor.
(4) Install the top engine cowling. Refer to Chapter 71-10
(5) Do an engine run up test. Look specially for
correct engine hour meter indications.
For the engine run procedure refer to the
DA20-C1 Flight Manual.
(6) Remove the top engine cowling. Refer to Chapter 71-10
(7) Examine the engine for oil leaks.
(8) Install the top engine cowling. Refer to Chapter 71-10
DA20-C1 AMM
Oil Systems
Doc # DA 201-C1
Rev. 9 79-00-00 Page 209
29 Apr 2004
8. Remove/Install The Oil Pressure Indicator
A. Remove The Oil Pressure Indicator
Detail Steps/Work Items Key Items
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石20系列AMM 2(112)