曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(1) Left-Hand Keys and Knobs
Refer to Chapter 23-10 for the COMM functions.
(2) Right Hand Keys and Knobs
 RNG – the range key allows the pilot to select the desired map scale. Press the up arrow
to zoom out or the down arrow side to zoom in.
 Direct-To – allows the pilot to enter a destination waypoint and establishes a direct course
to the selected destination.
 MENU – the menu key displays a context-sensitive options list. The options list allows
making setting changes that relate to the currently displayed page.
 CLR – the clear key is used to erase information or cancel an entry.
 ENT – the enter key is used to approve an operation or complete data entry.
 The Large Right Knob is used to select between the various page groups: NAV, WPT,
AUX or NRST.
(1) The Small Right Knob is used to select between the various pages within one of the
groups listed above. Pres this knob momentarily to display the on-screen cursor. The
cursor allows entering the data and/or making a selection from a list of options.
(3) Bottom Row Keys
Refer to the operators handbook provided with the equipment for additional information.
To operate the unit set the GEN/BAT switch and AVIONICS MASTER switch to ON. The related
circuit-breakers must be closed. Turn the COM Power/Volume knob clockwise from the OFF
position.
Navigation
DA20-C1 AMM
Page 18
15 Apr 2009 34-50-00 Doc # DA 201-C1
Rev. 15
Figure 10: GNS530W GPS NAV
DA20-C1 AMM
Navigation
Doc # DA 201-C1
Rev. 15 34-50-00 Page 19
30 Apr 2009
I. GARMIN GNS530W
The GNS530W is a VHF communications transceiver and a GPS receiver (see Figure 10).
Refer to Chapter 23-10 for the COMM functions. It also includes the a TSO’d airborne
VOR/Localizer and Glideslope receivers. It has two removable data cards, one with a Jeppesen
database (inserted in the left-most card slot) and the other the Terrain database (inserted in the
right-most card slot). See Figure 9.
The GNS530W has these controls:
(1) Left-Hand Keys and Knobs
Refer to Chapter 23-10 for the COMM functions
(2) Right Hand Keys and Knobs
 RNG – the range key allows the pilot to select the desired map scale. Press the up arrow
to zoom out to a larger area, or the down arrow side to zoom in to a smaller area.
 Direct-To – allows the pilot to enter a destination waypoint and establishes a direct course
(single-leg flight plan) to the selected destination.
 MENU – the menu key displays a context-sensitive options list. The options list allows the
pilot to make setting changes that relate to the currently displayed page.
 CLR – the clear key is used to erase information or cancel an entry.
 ENT – the enter key is used to approve an operation or complete data entry. It is also
used to confirm information, such as the Database page during power on.
 The Large Right Knob is used to select between the various page groups: NAV, WPT,
AUX or NRST.
 The Small Right Knob is used to select between the various pages within one of the
groups listed above. Pres this knob momentarily to display the on-screen cursor. The
cursor allows entering the data and/or making a selection from a list of options.
(3) Bottom Row Keys
Refer to the operators handbook provided with the equipment for additional information
To operate the unit set the GEN/BAT switch and AVIONICS MASTER switch to ON. The related
circuit-breakers must be closed. Turn the COM Power/Volume knob clockwise from the OFF
position.
Navigation
DA20-C1 AMM
Page 20
30 Apr 2009 34-50-00 Doc # DA 201-C1
Rev. 15
J. GNS430W/GNS530W VOR, LOC, G/S INDICATOR
The navigation indicator is designed to operate with GNS430W/GNS530W VHF and GPS
navigational equipment to provide OMNI (VOR), GPS, LOCALIZER (LOC) and Glideslope (GS)
information. It is designed to accept DC Left-Right, To-From and Nav warn flags signals from a
remote mounted VOR converter. It also accepts DC signals from a glideslope receiver which
will drive the UP-DOWN needle along with GS warn meter. The unit has NAV, GPS and VLOC
annunciation with photocell dimmimg. See Figure 11.
When the GPS is selected for display, the unit receives inputs from GNS430W/GNS530W to
provide visual presentation. The information presented in the navigation indicator is generated
from GNS430W/GNS530W.
DA20-C1 AMM
Navigation
Doc # DA 201-C1
Rev. 15 34-50-00 Page 21
30 Apr 2009
Figure 11: GARMIN VOR, LOC Indicator
Navigation
DA20-C1 AMM
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石20系列AMM 2(33)