曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Systems, Quality, Programs, Customer Services, Human Resources, Finance,
Procurement and Customer Affairs.
Functions can be grouped by the nature of the accountabilities and activities
assigned to them:
- Staff functions: organizations with primary advisory activities reporting to the
General Management or to the Heads of operative or central functions.
- Central functions: Human Resources and Finance and other supporting
organizations at General or national management level as well as within the
main operative functions.
- Operative functions: functions performing operative tasks to design,
manufacture, maintain or sell the company's products.
Functional Designation Common Terms/Aircraft
Constituent Items
Title describing the function of equipment/components or significant items of an
aircraft system/circuit/installation (see ABD0036).
Functional Item Number Common Terms/Aircraft
Constituent Items
Code allocated to the function of Equipment/Components or significant items of
an aircraft System/Circuit/Installation.
Refer to the AP2636 for the applicable rules for the FIN allocation.
General Assembly Drawing Aircraft Configuration The top Cascade Drawing which validates, per Aircraft Type and Version, the
Definition Dossiers to demonstrate that the Aircraft Configuration-Definition is in
Compliance with its Applicable
Definition Document (eg: Aircraft Standard Specification, Aircraft Modifications).
General Modification
Committee
Organization/Airbus Meeting organized to examine conflicts, make decisions about important
subjects or re-examine decisions and if necessary confirm the modification
decisions made during the continuous process. This committee meets as and
when required.
ACMR
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
35/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
General Visual Inspection Aircraft Servicing - Maintenance
- Overhaul - Repair
A visual examination of an interior or exterior area, installation or assembly to
detect obvious damage, failure or irregularity. This level of inspection is made
from within touching distance unless other specified. A mirror may be
necessary to enhance visual access to all exposed surfaces in the inspection
area. This level of inspection is made under normally available lighting
conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or
platforms may be required to gain proximity to the area being checked.
ATA MSG-3
Generic Part of a
Courseware
Training It is the set of Computer-Based Training (CBT) modules impacted only with
aircraft standard modifications or major options (engines, Units). This part can
be delivered to several customers without any modifications.
GIE Organization/Airbus "Groupement d'Intérêt Economique" a legal entity governed by a French
Ordonnance N° 67-821 dated September 23, 1967.
Global RFC Aircraft Definition
Evolution/Definition Evolution
Procedure
Document which lists several Customer originated changes.
Glossary Common Terms/Basic Terms A collection of terms limited to a special area of knowledge (eg: technical or
usage: dialectical words).
WD
Green Aircraft Aircraft Identification Aircraft with sufficient equipment for safe operation but without passenger
compartment furnishings and most of the associated equipment and
electronics. It may also have standard exterior paintwork with only the
manufacturer's name and serial number displayed.
Ground Support Equipment Common Terms/Basic Terms Equipment required on the ground to support the operation and maintenance of
the aircraft and all its airborne equipment.
WATOG
Group Organization/Airbus - Aircraft
Buyer Relationships
Association of Airlines.
Guidance Material Certification Helps to illustrate the meaning of a specification or requirement. EASA
Guide Organization/Management Direct in a way ; conduct. WD
Hand-Out Training Prepared paper document issued to trainees for specific complementary
technical information.
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
36/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Handover to AIB Planning No longer to be used.
Milestone in the Aircraft production.
Official session which takes place at the end of the Aircraft assembly to
compare the Aircraft status with its definition. At the end, the Aircraft is
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料4(35)