曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

identification purposes, enabling them to have a unique and abbreviated
reference mainly for Electronic Data Processing (EDP) use. These are fiveposition,
alphanumeric codes as specified in Cataloging Handbook H4/H8:
Sections C and D, NATO Supply Codes for Manufacturer (NSCM) (excluding
the USA and Canada).
Next Higher Assembly Customer Services/Contractual
Technical Publications
With reference to a cascade, it represents the next higher level to which an item
or group of items belongs.
No Technical Objection Aircraft Definition
Evolution/Definition Evolution
Implementation
An NTO is an Airbus written statement responding to an Operator request for
using specific aircraft in a configuration (aircraft definition) or with procedures
(operational or maintenance) which deviates from the current ones. The NTO is
issued in exceptional circumstances and would normally have a temporary
validity.
The statement contains information technically acceptable to Airbus and
specifies any conditions, limits or limitations identified as necessary.
The statement is not approved by the Airbus prime Airworthiness Authority
(DGAC - French Airworthiness Authority). It is the responsibility of the Operator
to obtain the local Airworthiness Authority approval according to the national
procedures for the provisions and the limitations contained in the document.
The NTO shall not be used for structural repairs for which ABD0054 applies.
ABD0084
Noise Certificate Certification Document which attests that the aircraft meets the noise regulations.
Non-Airbus Aircraft Aircraft Identification An aircraft which has not been designed or manufactured by Airbus but which
has temporarily come under the control and responsibility of Airbus who may
also maintain or operate the aircraft as owner or agent.
Note: Denoted by "NAA" where space is limited.
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
49/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Nonconformity Common Terms Non-fulfillment of a requirement. ISO 9000:2000
Non-Listed Assembly Customer Services/Contractual
Technical Publications
The computer cascade linking the general aircraft assembly to the breakdown
at IPC level.
IPC
Non-Revenue Flight Aircraft Operation/Operations
Engineering
A flight which does not generate revenue and which must not necessarily be
conducted in compliance with operational regulations for commercial
transportation.
Non-Standard Item Common Terms/Aircraft
Constituent Items
Designates any item which has not been classified Material or Standard Item
but which follows an Airbus Specification and Qualification procedure.
Note Organization/Management
Implementation
Record, or fix in the mind or memory. WD
Notice to Airmen Aircraft Operation/Flight
Operations
A notice containing information concerning the establishment, condition or
change in a component (facility, service procedure or hazard in the airspace
system), the timely knowledge of which is essential to personnel concerned
with flight operations.
Occasional Subcontracting Subcontracting Work subcontracted in the event of:
- workload peaks, to be absorbed,
- program stoppages, in order to maintain facilities, transfer manufacture,
- unpredictable production requirements.
On Board Replaceable
Module
Electronic Data Processing
(EDP)
An add-on device which enables computer software to be modified without
removal of the associated hardware.
On Job Training Training A set of maintenance training sessions composed of defined practical
operations and procedures to be accomplished by trainees on in-service
aircraft.
Operating Engineering
Bulletin
Aircraft Operation/Operations
Engineering
Bulletin published in the Flight Crew Operating Manual (FCOM) to provide
crews with urgent information related to:
- temporary resolution of technical problems by procedure,
- material to stress a particular aircraft behavior.
OEBs can be updated or cancelled.
Operational Group Organization/Airbus A group of specialists from all disciplines (Design, Certification, Production,
Purchasing, Product Support, Quality) working together on a given subject.
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
50/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Operational Interruption Aircraft Operation/General A (technical) Operational Interruption (OI) is a chargeable interruption of a
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料4(42)