曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 -------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| |  1  |  2  |  3  |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| |1. | | Visual Inspection of the Door | | | | | | | | | | | | | | | |  A.| | Do a visual inspection of the door: |  X  | | | | | | | | - skin in upper and lower areas for | | | | | | | | | distortion, cracks or tearing, | | | | | | | | | - door seal retainer, | | | | | | | | | - girt bar. | | | | | | | | | | | | | | | |  B.| | Check of the opening and closing of |  X  | | | | | | | | the door. | | | | | | | | | (1) Make sure that there are no | | | | | | | | | unusual noises or hard points. | | | | | | | | | (2) Make sure that the guide arms | | | | | | | | | move freely. | | | | | | | | | | | | | | | |  C.| | Check of the peripheral clearance and |  X  | | | | | | | | out-of-flushness between the door edge| | | | | | | | | and the frame panel: | | | | | | | | | (1) For the FWD passenger/crew door | | | | | | | | | (Ref. TASK 52-11-00-820-001) | | | | | | | | | (2) For the aft passenger/crew door | | | | | | | | | (Ref. TASK 52-13-00-820-001). | | | | | | | | | | | | | | | |  D.| | Check of the escape-slide release |  X  | | | | | | | | mechanism for absence of unsual noises| | | | | | | | | or hard points and for free movement | | | | | |
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 05-51-29Page 605 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 Passenger/Crew Doors
 Figure 601/TASK 05-51-29-991-001

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 05-51-29Page 606 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.|
 | |CODE| |  1  |  2  |  3  |SIGN|FIG.|
 |----|----|---------------------------------------|-----|-----|-----|----|----|

 | |  | of the handle. |  |  |  |  |  |
 | |  | |  |  |  |  |  |
 |2. |  | Detailed Inspection Without Removal |  |  |  |  |  |
 | |  | |  |  |  |  |  |
 |  A.|  | Examine the support arm. |  |  X  |  |  |  |
 | |  | (1) Make sure that there are no |  |  |  |  |  |
 | |  | cracks, distortion or damaged |  |  |  |  |  |
 | |  | paint. |  |  |  |  |  |
 | |  | (2) Examine the fittings that attach |  |  |  |  |  |
 | |  | the support arm to the door frame.|  |  |  |  |  |
 | |  | Make sure that there is no |  |  |  |  |  |
 | |  | distortion, damaged fasteners or |  |  |  |  |  |
 | |  | bearing migration. |  |  |  |  |  |
 | |  | (3) Examine the condition of the |  |  |  |  |  |
 | |  | connection links on the door side,|  |  |  |  |  |
 | |  | for distortion or damaged paint. |  |  |  |  |  |
 | |  | |  |  |  |  |  |
 |  B.|  | Examine the guide arms. |  |  X  |  |  |  |
 | |  | (1) Make sure that there is no wrink- |  |  |  |  |  |
 | |  | ling on the upper and lower guide |  |  |  |  |  |
 | |  | arms. |  |  |  |  |  |
 | |  | (2) Examine the fitting that attaches |  |  |  |  |  |
 | |  | the guide arm on the frame side |  |  |  |  |  |
 | |  | for distortion or damaged |  |  |  |  |  |
 | |  | fasteners. |  |  |  |  |  |
 | |  | (3) On the door side, examine the |  |  |  |  |  |
 | |  | guide-arm attach fitting for |  |  |  |  |  |
 | |  | tearing. |  |  |  |  |  |
 | |  | |  |  |  |  |  |
 |3. |  | Detailed Inspection with Removal |  |  |  |  |  |
 | |  | |  |  |  |  |  |
 |  A.|  | Remove the door. |  |  |  X  |  |  |
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 4(114)