-for item (5) (Ref. TASK 21-61-00-300-001).
1EFF : ALL 1 21-61-51Page 615 1 1 Feb 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | BB | 9.499 | 9.509 | | | 9.492 | | | | OD 1 |(0.3739) |(0.3743) | | |(0.3737) | | | | | | | 0.005 | 0.029 | | | 0.043 | | | | | (0.0001)| (0.0011)| | |(0.0016)| | BB | 9.514 | 9.528 | | | | 9.535 | | | ID 5 |(0.3745) |(0.3751) | | | |(0.3753) | | -------------------------------------------------------------------------------
Subtask 21-61-51-220-055
E. In-Service Wear Limits
(1) Use applicable measurement equipment and measure the OD of the bolt
(1) and the ID of the bushing (18).
NOTE : If any of the components are 'out of limits' then you must
____
replace them.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | BB | 9.499 | 9.509 | | | 9.492 | | | | OD 1 |(0.3739) |(0.3743) | | |(0.3737) | | | | | | | 0.005 | 0.029 | | | 0.043 | | | | | (0.0001)| (0.0011)| | |(0.0016)| | BB | 9.514 | 9.528 | | | | 9.535 | | | ID 18 |(0.3745) |(0.3751) | | | |(0.3753) | | -------------------------------------------------------------------------------
1EFF : ALL 1 21-61-51Page 616 1 1 Feb 01/05R 1 1 1CES 1
Subtask 21-61-51-220-056
F. In-Service Wear Limits
(1) Use applicable measurement equipment and measure the OD of the bushing (18) and the ID of the spherical bearing (6).
NOTE : If any of the components are 'out of limits' then you must
____
replace them.
-for item (6) you must replace the bracket (15) (Ref. TASK 21-61-51-000-003) and (Ref. TASK 21-61-51-400-003).
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | BB | 12.694 | 12.683 | | | 12.684 | | | | OD 18 |(0.4997) |(0.4993) | | |(0.4993) | | | | | | | 0.017 | 0.024 | | | 0.041 | | | | | (0.0006)| (0.0009)| | |(0.0016)| | BB | 12.700 | 12.718 | | | | 12.725 | | | ID 6 |(0.5000) |(0.5007) | | | |(0.5009) | | -------------------------------------------------------------------------------
Subtask 21-61-51-220-057
G. In-Service Wear Limits
(1) Use applicable measurement equipment and measure the OD of the bolt
(14) and the ID of the bushing (13).
NOTE : If any of the components are 'out of limits' then you must
____
replace them.
1EFF : ALL 1 21-61-51Page 617 1 1 Feb 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | CC | 6.325 | 6.337 | | | 6.318 | | | | OD 14 |(0.2490) |(0.2494) | | |(0.2487) | | | | | | | 0.003 | 0.027 | | | 0.041 | | | | | (0.0001)| (0.0010)| | |(0.0016)| | CC | 6.340 | 6.352 | | | | 6.359 | | | ID 13 |(0.2496) |(0.2500) | | | |(0.2503) | | -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AIR CONDITIONING 空調 5(72)
