(e)
Move the WXR antenna mount slowly in pitch until the value is within | 0.10 degree of the reference plate pitch value.
NOTE: With Kell Strom Pro 3600, each time the antenna is
____ moved, do not read the protractor display until the protractor has been in position for 5 seconds.
(f)
Carefully tighten the two top and two bottom pitch adjustment bolts to a value of 50 to 80 pound-inches.
(g)
Do a check of the digital protractor pitch value.
1) The pitch value must be within the reference plate pitch value | 0.10 degree.
(h)
Tighten the two pitch pivot bolts to a value of 50 to 80 pound-inches.
EFFECTIVITY
ALL 02 Page 208 Oct 25/9734-43-19
(9) Adjust the WXR antenna mount to the airplane roll value:
NOTE: Make sure the digital protractor on the transfer plate
____ is in the same direction as on the reference plate.
(a)
Loosen the two bottom and the top center roll adjustment bolts on the WXR antenna mount.
(b)
Make clean the measurement surfaces on the transfer plate with a lint-free dry cloth.
(c)
Put the digital protractor on the roll measure surface of the reference plate.
(d)
Kell Strom Pro 3600; Make sure the digital protractor has been in position for five seconds before reading the display.
(e)
Move the WXR antenna mount slowly in roll until the value is within | 0.10 degree of the reference plate roll value.
NOTE: With Kell Strom Pro 3600, each time the antenna is
____ moved, do not read the protractor display until the protractor has been in position for 5 seconds.
(f)
Carefully tighten the two bottom and top center roll adjustment bolts to a value of 50 to 80 pound-inches.
(g)
Do a check of the digital roll value.
1) The roll value must be within the reference plate roll value | 0.10 degree.
(h)
Set the ON/OFF switch on the digital protractor to OFF.
(i)
Remove the digital protractor from the transfer plate.
(j)
Remove the transfer plate from the WXR antenna mount. 1) Remove the two bottom transfer plate support bolts from the
WXR antenna mount. 2) Loosen the two top transfer plate bolts. 3) Remove the transfer plate from the WXR antenna mount.
(k)
Tighten the top left and top right roll adjustment bolts to a value of 50 to 80 pound-inches.
(10)
Remove the two top antenna support bolts, which are part of the G34004 transfer plate, from the WXR antenna mount.
(11)
Install the two top antenna support bolts into the WXR antenna mount.
(12)
Remove test equipment from the airplane:
(a)
Put the transfer support plate bolts into the holes supplied in the transfer plate.
(b)
Remove the reference plate from the reference transfer points at STA 1460 and LBL 25.00.
(13)
Install the floor panels removed at STA 1460 and LBL 25.00 (AMM 53-21-02/401).
(14)
PASSENGER AIRPLANES; Install the passenger seats removed at STA 1460 and LBL 25.0 (AMM 25-25-01/401).
EFFECTIVITY
ALL 02 Page 209 Oct 25/9734-43-19
(15) FREIGHTER AIRPLANES; Install the equipment that follows between STA 1460 and LBL 25.00 (AMM 25-25-01/401):
(a)
Install the main deck floor panel or panels (AMM 53-21-02/401).
(b)
Install the castor/roller trays (AMM 25-57-04/401).
(c)
Install the lock/stop roller trays (AMM 25-58-01/401).
EFFECTIVITY
ALL 01 Page 210 Oct 25/9734-43-19
WEATHER RADAR RECEIVER/TRANSMITTER MOUNT
________________________________________ BLOWER ASSEMBLY - REMOVAL/INSTALLATION
______________________________________
1. General_______
A. This subject has two tasks. The first task is a removal of the blower assembly on the receiver/transmitter (R/T) mount. The second task is for the installation of the blower assembly on the R/T mount.
B. PASSENGER AIRPLANES; The blower assemblies are on the dual R/T mount on the E5 rack. You get access through the access opening in the right crawlway forward of the main electronic equipment center. You use this procedure to remove the blower assembly only, not the full R/T mount.
C. FREIGHTER AIRPLANES; The blower assembly on each mount is found below the floor compartment between station 180 and 220. You use this procedure to remove the blower assembly only, not the full R/T mount.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747飛機維護手冊AMM CHAPTER 34 - NAVIGATION 第34章導航4(22)
