______________________________________________________________________ INTERFACES - MAINTENANCE PRACTICES
__________________________________ R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
TASK 46-21-00-860-001
Initialization Procedure of the ATSU Router
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 31-60-00-860-001 EIS Start Procedure 34-10-00-860-002 ADIRS Start Procedure 46-21-00-860-002 Procedure to Get Access to the DSP USER-DEFINED Pages 46-21-00-860-003 Programming of ARINC ASIA (USER-DEFINED) 46-21-00-860-004 Programming of NEWARINCEU DSP (USER-DEFINED)
**ON A/C 151-158, 201-209,
Post SB 46-1009 For A/C 151-152,201-203,
46-21-00-991-008 Fig. 201
R **ON A/C 106-149, 151-156, 159-199, 201-299, 301-399, 401-499,
Post SB 46-1009 For A/C 151-152,201-203,
Post SB 46-1013 For A/C 151-156,201-209,
46-21-00-991-008-A Fig. 201A
**ON A/C 151-152, 201-203,
46-21-00-991-009 Fig. 202
R 1EFF : 062-099, 106-149, 151-199, 201-299, 1 46-21-00Page 201 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 106-149, 151-156, 159-199, 201-299, 301-399, 401-499, Post SB 46-1009 For A/C 151-152,201-203, Post SB 46-1013 For A/C 151-156,201-209,
46-21-00-991-009-B Fig. 202A
**ON A/C 151-158, 201-209,
Post SB 46-1009 For A/C 151-152,201-203,
46-21-00-991-009-A Fig. 202B
**ON A/C 153-158, 204-209,
46-21-00-991-011 Fig. 203 R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
3. Job Set-up
__________
Subtask 46-21-00-861-053
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
Subtask 46-21-00-865-054
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 49VU SDAC/1/SPLY 3WV F04 49VU FWS/FWC1/SPLY 3WW F01 49VU COM/RMP/1 2RG1 G10
121VU CFDS/CFDIU/SPLY 2TW J18 121VU ATSU 1 3TX1 L16 121VU ATSU 1/SWTG 5TX1 L15 121VU COM NAV/VHF/3 2RC3 L05
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-21-00Page 202 1401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU COM NAV/RMP/3 2RG3 L03 121VU COM NAV/RMP/2 2RG2 L02 121VU AUTO FLT/MCDU/2 11CA2 N20 121VU EIS/FWC2/SPLY 2WW Q07
**ON A/C 151-199, 201-210,
121VU AIDS/DMU 4TV K15
R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 46-21-00-860-058
C. Aircraft Maintenance Configuration
(1)
Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(2)
Do the EIS start procedure (Ref. TASK 31-60-00-860-001).
(3)
Make sure that the ATC 1 or ATC 2 transponder is operational.
4. Procedure
_________
**ON A/C 151-152, 201-203,
Subtask 46-21-00-860-059
A. Initialization of the ATSU Router (Ref. Fig. 201/TASK 46-21-00-991-008, 202/TASK 46-21-00-991-009)
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the center pedestal, on the
RMP 1 (2 or 3):
-
set the ON/OFF switch to ON
-
set VHF 3
2. On the MCDU 1 (2 or 3): On the MCDU 1 (2 or 3):
-push the MCDU MENU mode key. - the MCDU MENU page comes into view.
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-21-00Page 203 1401-499, 1Aug 01/05 1 1 1CES 1
MCDU Access to COMM MENU page
Figure 201/TASK 46-21-00-991-008
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 信息系統 INFORMATION SYSTEMS(26)
