(Ref. Fig. 201/TASK 46-21-00-991-008, 202B/TASK 46-21-00-991-009-A)
**ON A/C 153-158, 204-209,
(Ref. Fig. 203/TASK 46-21-00-991-011)
**ON A/C 151-158, 201-209,
Post SB 46-1009 For A/C 151-152,201-203,
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the center pedestal, on the RMP 1 (2 or 3):
-
set the ON/OFF switch to ON
-
set VHF 3
2. On the MCDU 1 (2 or 3): On the MCDU 1 (2 or 3):
-push the MCDU MENU mode key. - the MCDU MENU page comes into view.
On the MCDU MENU page:
-
the ATSU prompt is shown.
-
the ACARS STBY memo is shown.
On the upper ECAM DU:
NOTE : This memo shows that the ATSU
____ router is not initialized.
3. On the MCDU MENU page: On the MCDU 1 (2 or 3):
-push the line key adjacent to - the ATSU DATALINK page comes into the ATSU indication. view.
1EFF : 151-158, 201-209, 1 46-21-00Page 215 1 1 Aug 01/05R 1 1 1CES 1
Access to COMM INIT and VHF3 SCAN MASK pages
Figure 202B/TASK 46-21-00-991-009-A
R 1EFF : 151-158, 201-209, 1 46-21-00Page 216 1 1 Aug 01/04 1 1 1CES 1
MCDU Access to DSP USER-DEFINED pages
Figure 203/TASK 46-21-00-991-011
R 1EFF : 153-158, 204-209, 1 46-21-00Page 217 1 1 Aug 01/04 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4. On the ATSU DATALINK page:
-push the line key adjacent to the (REQ) COMM indication.
5. On the COMM MENU page:
-push the line key adjacent to the COMM INIT indication.
6. On the MCDU 1 (2 or 3):
-push the CLR mode key until the last scratchpad message goes out of view
7. On the COMM INIT page:
-enter the three-character code of the A/L IDENT in the scratchpad
-push the line key adjacent to the A/L IDENT-3 indication (4L).
8. On the COMM INIT page:
-enter the two-character code of the A/L IDENT in the scratchpad
-push the line key adjacent to the A/L IDENT-2 indication (3L).
9. On the MCDU 1 (2 or 3): On the MCDU 1 (2 or 3):
-
the COMM MENU page comes into view.
On the COMM MENU page:
-
the ENTER A/L IDENT message is shown in the scratchpad.
On the MCDU 1 (2 or 3):
-
the COMM INIT page comes into view.
On the COMM INIT page:
-make sure that the Aircraft Registration Number is shown in the A/C REGISTR field.
NOTE : This data comes from the CFDIU.
____
On the COMM INIT page:
-
the scratchpad is empty and availablefor manual entry
On the COMM INIT page:
-
the three characters of the A/L IDENTcode come into view in the scratchpad
-
the three characters of the A/L IDENTcode come into view in the relatedboxes.
On the COMM INIT page:
-
the two characters of the A/L IDENTcode come into view in the scratchpad
-
the two characters of the A/L IDENTcode come into view in the relatedboxes.
-
the ENTER VHF3 SCAN MASK message comes into view in the scratchpad.
On the COMM INIT page:
1EFF : 151-158, 201-209, 1 46-21-00Page 218 1 1 Aug 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the CLR mode key to clear the scratchpad message.
10. On the COMM INIT page:
-push the line key adjacent to the VHF3 SCAN MASK indication.
11. On the VHF3 SCAN MASK page:
-push the line key adjacent to the ALL INPUTS *ERASE indication.
12. On the VHF3 SCAN MASK pages:
-push successively the line keys adjacent to the Service Providers (SP) indications in the appropriate priority order.
NOTE : You can add two more
____ service providers for the scan mask (Ref. TASK 46-21-00-860-002).
13. On the VHF3 SCAN MASK page:
-push the line key adjacent to the SCAN MASK ACTIVATE* indication.
14. On the RMP1 (2 or 3):
-if the ACARS indication is not shown in the ACTIVE window, push the transfer pushbutton switch (double arrow) between the two windows.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 信息系統 INFORMATION SYSTEMS(30)
