R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-21-00Page 319 1401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------NOTE : When the ON/OFF switch on the
____ Data Loading Selector is set to OFF, the ATSU does a Power On Self-Test (POST). The COM ACARS FAULT or DATALINK ATSU FAULT warning goes out of view at the end of this test.
On the MCDU MENU page:
-the ATSU prompt comes into view.
NOTE : If the ATSU Router is not
____ initialized, the ACARS STBY memo or the DATALINK ATSU FAULT + ATSU INIT FAULT warning comes into view on the upper ECAM DU.
9. Repeat the same operation for each set of application disks that you must upload.
**ON A/C 151-154, 201-207,
Subtask 46-21-00-280-056
C. Do a check of the Reference(s) of the Software loaded in the ATSU, on the MCDU.
NOTE : It takes one minute approximately to the ATSU software to be
____
operational after the loading procedure.
(1) Do the procedure to get access to the SYSTEM REPORT/TEST/COM page (Ref. TASK 31-32-00-860-003).
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-21-00Page 320 1401-499, 1Aug 01/05 1 1 1CES 1
(2) Do a check of the reference of the software loaded in the ATSU, on the MCDU:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU, on the SYSTEM REPORT/TEST/COM page 2/2: - push the line key adjacent to the ACARS MU indication. On the MCDU:- the ATIMS menu page comes into view.
2. On the ATIMS page: - push the line key adjacent to the LRU IDENT indication. On the MCDU:- the LRU IDENTIFICATION page comesinto view
- make sure that the ATSU A/C INTERFACE P/N reference shown is the same as the reference read on the disk(s) of the ATSU A/C INTERFACE software 20TX.
NOTE : On the disk (20TX), the last____ number of the ATSU A/C INTERFACE software reference is F1 but on
the LRU IDENTIFICATION page, the last number of this reference is
00.
**ON A/C 155-158, 208-209,
Subtask 46-21-00-280-056-A
R C. Do a Check of the Reference(s) of the Software loaded in the ATSU, on the MCDU.
NOTE : It takes one minute approximately to the ATSU software to be
____
operational after the loading procedure.
(1) Do the procedure to get access to the SYSTEM REPORT/TEST/INFO SYS Page (Ref. TASK 31-32-00-860-013).
R 1EFF : 151-158, 201-209, 1 46-21-00Page 321 1 1 Feb 01/05 1 1 1CES 1
(2) Do a check of the reference of the software loaded in the ATSU, on the MCDU:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU: On the MCDU:
-push the line key adjacent to - the ATIMS menu page comes into view. the ATIMS indication.
2. On the ATIMS page: On the MCDU:
-push the line key adjacent to - the LRU IDENTIFICATION page comes the LRU IDENT indication. into view
-make sure that the ATSU A/C INTERFACE P/N reference shown is the same as the reference read on the disk(s) of the ATSU A/C INTERFACE software 20TX.
NOTE : On the disk (20TX), the last
____ number of the ATSU A/C INTERFACE software reference is F1, but on the LRU IDENTIFICATION page, the last number of this reference is
00.
R **ON A/C 106-149, 155-156, 159-199, 208-299, 301-399, 401-499,
Post SB 46-1013 For A/C 155-156,208-209,
Subtask 46-21-00-280-056-B
C. On the MCDU, do a Check of the Reference(s) of the Software loaded in the ATSU.
NOTE : It takes one minute approximately to the ATSU software to be
____
operational after the loading procedure.
(1) Do the procedure to get access to the SYSTEM REPORT/TEST/INFO SYS Page (Ref. TASK 31-32-00-860-013). 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM 信息系統(tǒng) INFORMATION SYSTEMS(41)
