R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)(4000KS)
R AMM 73-21-60-400-001 Installation of the Electronic Control Unit
R (ECU)(4000KS)
R AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with
R Engine non Motoring)
R 3. Fault Confirmation
__________________
R A. Do the operational test of the FADEC 1B on the ground (with engine non R motoring) (Ref. AMM TASK 73-29-00-710-040).
R 4. Fault Isolation
_______________
R A. If the test gives the maintenance message ECU (CHAN SYNCH):
R - replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM
R TASK 73-21-60-400-001).
F 『 EEFF : ALL E ∞∞73-20-81∞∞∞∞∞∞∞∞∞∞Page 264
E E Aug 01/01 E E ECES
E
F 『
E C F M E
E E
E 56 E
E E
R TASK 73-20-81-810-872
R Internal Failure of the ECU on Engine 2
R 1. Possible Causes
_______________
R - ECU (4000KS)
R 2. Job Set-up Information
______________________
R A. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)(4000KS)
R AMM 73-21-60-400-001 Installation of the Electronic Control Unit
R (ECU)(4000KS)
R AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with
R Engine non Motoring)
R 3. Fault Confirmation
__________________
R A. Do the operational test of the FADEC 2A on the ground (with engine non R motoring) (Ref. AMM TASK 73-29-00-710-040).
R 4. Fault Isolation
_______________
R A. If the test gives the maintenance message ECU (CHAN SYNCH):
R - replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM
R TASK 73-21-60-400-001).
F 『 EEFF : ALL E ∞∞73-20-81∞∞∞∞∞∞∞∞∞∞Page 265
E E Aug 01/01 E E ECES
E
F 『
E C F M E
E E
E 56 E
E E
R TASK 73-20-81-810-873
R Internal Failure of the ECU on Engine 2
R 1. Possible Causes
_______________
R - ECU (4000KS)
R 2. Job Set-up Information
______________________
R A. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)(4000KS)
R AMM 73-21-60-400-001 Installation of the Electronic Control Unit
R (ECU)(4000KS)
R AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with
R Engine non Motoring)
R 3. Fault Confirmation
__________________
R A. Do the operational test of the FADEC 2B on the ground (with engine non R motoring) (Ref. AMM TASK 73-29-00-710-040).
R 4. Fault Isolation
_______________
R A. If the test gives the maintenance message ECU (CHAN SYNCH):
R - replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM
R TASK 73-21-60-400-001).
F 『 EEFF : ALL E ∞∞73-20-81∞∞∞∞∞∞∞∞∞∞Page 266
E E Aug 01/01 E E ECES
E TASK 73-20-81-810-874
F 『
E C F M E
E E
E 56 E
E E
Internal Failure of the ECU on Engine 1
1. Possible Causes
_______________
- ECU (4000KS)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)(4000KS) AMM 73-21-60-400-001 Installation of the Electronic Control Unit (ECU)(4000KS) AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with Engine non Motoring) ASM 73-25/10
3. Fault Confirmation
__________________
A. Do the operational test of the FADEC 1B on the ground (with engine non motoring) (Ref. AMM TASK 73-29-00-710-040).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 發動機燃油和控制 2(24)
