(6)
Install the cover on the pressure fill coupling on the IDG.
S 433-010
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-13-07
ALL ú ú 04 Page 305 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 033-011
CAUTION: DO NOT REMOVE THE OUTLET HOSE FROM OVERFLOW DRAIN COUPLING
_______ UNTIL THE FLOW OF OIL STOPS. TOO MUCH OIL IN THE IDG CAN CAUSE DAMAGE.
(7)
When the flow of oil stops, remove the outlet hose from the overflow drain coupling.
S 433-012
(8)
Install the cover on the overflow drain coupling on the IDG.
TASK 12-13-07-213-013
3. Examine the IDG Oil Level
_________________________
A. Procedure
S 863-026
(1)
Stop for five minutes, after engine shut down, while the oil level becomes stable.
S 163-027
(2)
Use a rag and rub the view port of the oil level indicator clean.
S 863-028
(3)
Look into the view port of the oil level indicator.
S 823-029
(4)
Align the four white marks, found in the view port, in a straight line.
NOTE: A flashlight can be necessary to see the four white marks.
____ Do not point the light directly into the view port. Reflections can cause incorrect indications.
S 863-030
(5) If you see an OK and no bright silver mark in the view port, the IDG is filled. If the IDG does not have an 'OK' indicator, it will appear black when the level is satisfactory.
(a)
If you see a bright silver mark in the view port, the IDG is not filled.
(b)
Do the oil fill procedures again.
S 863-041
(6) For a new IDG, do these steps:
(a) Dry motor the engine.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-13-07
ALL ú ú 04 Page 306 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(b) Do the oil fill procedures again.
S 413-034
(7) Close the oil service access door, for the IDG, on the left core cowl panel.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-13-07
ALL ú ú 05 Page 307 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
AIR-DRIVEN PUMP TURBINE DRIVE - SERVICING (OIL REPLENISHING)
____________________________________________________________
1. General_______
A. This procedure has one task. This task fills the air-driven pump (ADP) turbine drive (referred to as the turbine drive). This task is the same for the turbine drive of each ADP.
B. You must open the doors in the trailing edge fairing to get access to the turbine drive.
TASK 12-13-09-613-003
2. Fill the Air-Driven Pump Turbine Drive (Fig. 301)______________________________________
A. Consumable Materials
(1)
D00071 Engine oil, MIL-L-7808
(optional to MIL-L-23699)
(2)
D00068 Engine oil MIL-L-23699
(optional to MIL-L-7808)
B. References
(1)
54-62-00/201, Nacelle Strut Access Panels
(2)
54-62-02/501, Nacelle Strut Access Doors
C. Access
(1)
Location Zone
454 System 1 - Strut Trailing Edge Fairing
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 SERVICING 1(53)
