76-11-06
ALL ú ú C01 Page 402 ú Jun 25/85
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 034-006-C00
(5) Disconnect the cables from the shutoff quadrant as follows:
(a)
ON ENGINE NO. 1; Do the steps that follow: 1) Remove the cable retainer from the quadrant. 2) Disconnect the cable terminals from the quadrant groove. 3) Remove the retainer pin, the bushing, the nut and the
washers. 4) Disconnect the push-pull cable from the quadrant.
(b)
ON ENGINE NO. 2; Do the steps that follow: 1) Remove the retainer pin, the cable retainer, the bushing,
the nut and the washers. 2) Disconnect the cable terminals from the quadrant groove.
3) Disconnect the push-pull cable from the quadrant.
(c) Tag the ESS( )A and ESS( )B cables for correct installation.
S 014-007-C00
(6)
ON ENGINE NO. 1; Disconnect the support strut from the shutoff assembly.
S 014-008-C00
(7)
Remove the shutoff assembly mounting bolts and the washers.
S 024-009-C00
(8)
Remove the assembly from the spar brackets.
S 034-010-C00
(9)
ON ENGINE NO. 2; Disconnect the T2A cable sheath from the nylon guide block.
TASK 76-11-06-404-011-C00
3. Fuel Shutoff Assembly Installation (Fig. 401)
__________________________________
A. References
(1) AMM 12-31-71/201, Wing Upper Surface Access Doors and Panels
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-06
ALL ú ú C01 Page 403 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(2)
AMM 27-81-00/201, Leading Edge Flaps and Slats
(3)
AMM 76-11-00/501, Engine Control System
(4)
AMM 78-31-00/201, Thrust Reverser System
B. Access
(1)
Location Zones
504/604 Thrust Reverser - Left
505/605 Thrust Reverser - Right
507/607 Strut
(2)
Access Panel
6301/6401 LE Access Panel
C. Procedure
S 424-012-C00
(1)
Put the fuel shutoff assembly in its position on the spar brackets.
S 414-013-C00
(2)
Install the bolts and washers.
S 434-014-C00
(3)
ON ENGINE NO. 2;
Put the T2A cable sheath in the nylon guide block.
S 414-015-C00
(4)
ON ENGINE NO. 1;
Connect the support strut to the shutoff bracket.
S 414-016-C00
(5)
Connect the cables to the shutoff assembly as follows:
(a) ON ENGINE NO. 1; Do the steps that follow: 1) Put the terminals of the ESS1A and the ESS1B cables in the
quadrant groove. 2) Install the cable retainer. 3) Connect the push-pull cable to the quadrant with the
retainer.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-06
ALL ú ú C01 Page 404 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發動機控制 ENGINE CONTROLS(67)
