S 014-010
(1)
If the circuit cards are not removed, do the steps that follow:
(a)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
1) On the main power distribution panel, P6: a) 6D5, FUEL QTY 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-13
ALL ú ú 06 Page 405 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
b) 6D6, FUEL QTY 2
2) On the DC power distribution panel, P180: a) 180M8, FUELING VALVE 2 b) 180M9, FUELING PWR - HOT BAT c) 180C25, FUELING LTS PANEL d) 180C26, FUELING LTS RECP
3) On the left power distribution center, P414: a) 414F17, FUELING VALVE b) 414F22, FUELING PWR
(b) Open the electronics access door, 125B, to get access to the fuel quantity processor unit.
NOTE: The fuel quantity processor unit is immediately forward
____ of the electronics access door.
(c) Open the door on the fuel quantity processor unit.
S 034-012
(2)
Disconnect all the electrical connectors from the fuel quantity processor unit.
S 034-013
(3)
Disconnect the cooling air hose from the side of the fuel quantity processor unit.
S 024-014
(4)
Remove the fuel quantity processor unit (AMM 20-11-22/401).
TASK 28-41-13-404-054
5. Fuel Quantity Processor Unit (FQPU) Installation (Fig. 401)
________________________________________________
A. References
(1)
AMM 20-11-22/401, E/E Rack-Mounted Components
(2)
AMM 24-22-00/201, Manual Control
(3)
AIPC 28-21-52, Fig. 1
(4)
SSM 28-41-02, 28-41-03, 28-41-04, 28-41-05
(5)
WDM 28-41-12, 28-41-21, 28-41-22, 28-41-23, 28-41-24
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-13
ALL ú ú 06 Page 406 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
B. Access
(1)
Location Zone 125 Area Below Forward Cargo Container Compartment, Left
(2)
Access Panel
125B Electronics Access Door
C.
Procedure
S 424-061
(1)
Install the fuel quantity processor unit on the E6 equipment rack (AMM 20-11-22/401).
S 434-062
(2)
Connect the cooling air hose to the side of the fuel quantity processor unit.
S 434-063
(3)
Connect all the electrical connectors to the fuel quantity processor unit.
NOTE: Make sure the connectors are in the correct location.
____
S 434-064
(4)
If the circuit cards are not installed in the new FQPU, do this task: "Fuel Quantity Processor Unit Circuit Cards Installation".
S 414-065
(5)
If all the circuit cards are installed in the new FQPU, do the steps that follow:
(a)
Supply electrical power, if it is not available (AMM 24-22-00/201).
(b)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
1) On the main power distribution panel, P6: a) 6D5, FUEL QTY 1 b) 6D6, FUEL QTY 2
2) On the DC power distribution panel, P180: a) 180M8, FUELING VALVE 2 b) 180M9, FUELING PWR - HOT BAT
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-13
ALL ú ú 05 Page 407 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
c) 180C25, FUELING LTS PANEL
d) 180C26, FUELING LTS RECP
3) On the power distribution center, P414:
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 4(138)
